1/3/5/10pcs Mhouse GTX4 MyHouse TX4 TX3 Remote Control For Garage Door Gate 433.92mhz Rolling Code Transmitter

Mhouse GTX4 Garage/Gate Remote ControlFREE Battery installed in the device for your convenience!For mhouse/myhouse gates, garage doors, barriers or other mhouse/myhouse automation systems. The remote control comes with programming instructions that show you how to "learn" new unit from an existing one.Compatible Model :Mhouse TX3Mhouse TX4Mhouse GTX4myHouse remotesThe radio control MHOUSE GTX4 has replaced the previous model MHOUSE TX3/TX4Description:Model: Mhouse GTX4Frequency: 433.92 MHz Number of button: 4Power Battery: CR2032Coding: Rolling CodeDimensions: 50 mm × 50 mm × 10 mmNote:No original goods, but 100% perfect fit! All brand names, trademarks and registered trademarks are the property of their legal owners and are used here only for the description or identification of the devices. The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.Listing Includes:* Mhouse Compatible Remote Control* Battery* Keychain* ManualPROGRAMMING REMOTE MHOUSE MOTORS1. Hold down the top, right button (P1 BUTTON) until the LED lights up (3 seconds), then release the button. WITHIN 5 SECONDS2. Hold down any button on the remote until the LED LIGHT on the Control Card flashes 3 times (About 4 Seconds), then release.(Remembering what button on the Remote was pressed for opening and closing cycle).3. When the LED LIGHT goes out on the Control Card, the programming is complete.4. Repeat for all others remotes