ENET Cable for BMW F/G Series Coding – 2m Ethernet to OBD2 Diagnostic Interface for E-SYS ISTA Bimmercode Bootmod3 – Heavy Duty

✅ 1‑YEAR WARRANTY | 🔌 2M SHIELDED ENET CABLE | 🛡️ CE & RoHS COMPLIANTBMW ENET Ethernet to OBD2 CableFor F/G/I‑Series Coding, Diagnostics & ECU Flashing – 2m Heavy‑Duty Shielded[Professional BMW Coding Cable] – OHP ENET Cable for BMW I/F/G Series enables Bimmercode, E-SYS, ISTA, and ICOM coding and                                                                           programming via Ethernet-to-OBD2 connection. Perfect for diagnostics, retrofits, and module configuration[Fast, Reliable Connection] – Shielded CAT5e Ethernet cable with gold-plated RJ45 and pure copper wiring ensures stable data transfer during BMW                                            coding or firmware updates[Software Compatibility] – Works with ISTA+, INPA, and other BMW diagnostic programs. Supports vehicle coding, feature activation, and                                                         programming[BMW Model Support] – Designed for F-Series I-Series G-Series BMW: 1, 2, 3, 4, 5, 7, X3, GT, and more using ENET interface. Not for E-Series                                            (requires K+DCAN cable)[Important Notes] – For Windows OS only. Can work on MacBook through Virtual Machine. Includes OHP quality assurance 1 year warrantyENET OBD2 Cable for BMW F/G/i Series Ethernet Adapter Pure Copper 2M/6.6ft | Compatible with Bimmercode,E-SYS, ISTA+, Bootmod3, Bimmerlink,ProTool,Bimmer-Tool⚡ENET High‑SpeedUp to 100 Mbps🛡️              Shielded CAT5e Pure Copper, Gold‑plated📏          2m / 6.5ft Perfect Workshop Length💻                  No Drivers Plug & IP‑Config✅ Why Choose This ENET Cable?📡 Factory‑Level Communication – Direct Ethernet link to BMW’s ENET (DoIP) system, far faster than K+DCAN or USB‑OBD cables.🔧 Full Coding & Programming – Activate hidden features (digital speed, folding mirrors, video in motion), code new modules, flash ECUs.🛠️ Wide Software Compatibility – Works flawlessly with E‑SYS, ISTA+, INPA, WinKFP, Bimmercode, Bimmerlink, Bootmod3, Tool32 and more.📦 Ready for Professional Use – Gold‑plated RJ45 connector, shielded twisted‑pair cable, durable OBD2 plug with strain relief.🔄 Plug & Play (No Drivers) – Just set static IP, no software installation required for the cable itself.⚙️ Technical SpecificationsConnector AOBD2 (16‑pin female)Connector BRJ45 Ethernet (gold‑plated)Cable TypeCAT5e shielded, pure copper coreLength2 meters (6.5 feet)ProtocolsENET (DoIP), CAN, K‑LineOS CompatibilityWindows 7/8/10/11 (32/64‑bit), macOS via VM, iOS/Android with adaptersPower SupplyPowered via vehicle OBD2 port (12V DC)Warranty1 year🚗 Compatible BMW Models (2010+ ENET)F‑SeriesF20, F21, F22, F23, F30, F31, F32, F33, F34, F36,F10, F11, F07, F06, F12, F13, F01, F02, F03, F04,F15, F16, F25, F26, F85, F86, F80, F82, F83, F87, F45, F46G‑SeriesG20, G21, G22, G23, G26, G28, G30, G31, G38,G11, G12, G01, G02, G05, G06, G07, G08, G29, G32I‑Series / Mini / Rolls‑Roycei3 (I01), i8 (I12)Mini F55/F56/F57/F60Rolls‑Royce Ghost, Wraith, Dawn (2010+)⚠️ Not for E‑series (E46, E60, E90, etc.) – those require K+DCAN cable.📱 Compatible Diagnostic Software (Not Included)✅ E‑SYS – Full coding & module programming (with PSdZData)✅ ISTA+ (Rheingold) – Dealer‑level diagnostics, service functions✅ Bimmercode / Bimmerlink – Mobile coding (Ethernet adapter may be required for iPhone)✅ Bootmod3 – ECU tuning & flashing✅ INPA / WinKFP / Tool32 – Legacy module support💡 Software licenses must be obtained separately. We do not provide any software or activation codes.🔧 Quick Setup GuideConnect – Plug OBD2 end into car diagnostic port (driver side). Plug RJ45 into laptop Ethernet port.Configure IP – Set static IP on your Ethernet adapter:IP address: 169.254.1.10 (or any 169.254.x.x)Subnet mask: 255.255.0.0Gateway: leave blank.Launch Software – Open E‑SYS, ISTA, or Bimmercode, select ENET connection type.Start Coding – Follow software instructions. Done!📘 Detailed PDF guide with screenshots available upon request (message us).❓ Frequently Asked QuestionsQ: Is this cable plug & play?A: Yes, hardware is plug & play (no drivers). However you must manually set the laptop IP address as described.Q: Can I use this with my MacBook?A: Yes, via a USB‑C to Ethernet adapter and a Windows virtual machine (Parallels, VMware, etc.). Also works with Bimmercode on iPhone with Lightning to Ethernet adapter.Q: Does it work with Bimmercode on Android?A: Yes, you need an OTG to Ethernet adapter (not included).Q: What is the warranty?A: 1 year against manufacturing defects. 30‑day return for defective items.Q: Is this cable compatible with E‑series BMW?A: No. ENET cables are only for F/G/I series (2010+). For E‑series, please search for K+DCAN cable.Q: Where can I get the software?A: You can purchase software licenses from official websites or automotive diagnostic platforms. We do not provide software or cracks.🛡️ EU Declaration of Conformity (Summary)This product complies with EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, and LVD 2014/35/EU. Harmonised standards: EN 55032, EN 55035, EN IEC 63000. CE marked. Manufacturer & EU authorised representative information available in the product manual.📦 Bulk Orders for Workshops & Retailers – Contact us for special pricing (3+ units).🛡️ 24/7 customer support – Message us with any questions before or after purchase.⚠️ DISCLAIMER: This is a professional diagnostic cable compatible with ENET‑supported BMW vehicles. All trademarks are property of their respective owners. Diagnostic software is NOT included. For BMW F/G/I series only (2010+). Not for E‑series.