diymore | ESP32-S3 Wifi Bluetooth Development Board Dual Type-C CORE Board Onboard Esp32-S3 N16R8 N8R2 Module With Antenna Base and Case

Development boardFeatures:1. High performance dual core processor: Integrated with a 32-bit LX7 dual core processor, providing powerful computing power and low-power performance.2. Wi Fi and BT dual-mode support: Supports 2.4GHz Wi Fi and BT 5 (BLE), compatible with multiple wireless communication protocols.3. Efficient data transmission: With a data rate of up to 150 Mbps, it ensures a fast and stable connection.4. Multi interface: Comes with two Type-C interfaces, one can be used directly with a COM tag, and the other USB can be powered on using OTG or by holding down BOOT to display the port and download the program normally.5. Low power and high power modes: Equipped with a low-power coprocessor and a high power mode of up to 20 dBm, suitable for various application scenarios.Product Introduction:This product is a development board based on the ESP module, with multiple IO ports and onboard WS2818RGB, corresponding to IO48. Comes with two Type-C interfaces, one can be used directly with a COM tag, and the other USB can be powered on using OTG or by holding down BOOT to display the port and download the program. The factory program automatically lights up RGB when connected to WiFi and turns off when disconnected.Parameter:Working voltage: 3.3~5VIO ports: 36 IO portsFlash：N16R8 (16M)、N8R2 (8M)PSRAM：N16R8 (8M)、N8R2 (2M)2 I2C, 4 SPI interfacesSize: 57mm * 28mmPackage Include:1X development board2X needle arrangement (unwelded needle arrangement/welded needle arrangement can be selected)Notice:Be careful not to short-circuit the pins, as it may burn out the module.Detailed module parameters can be obtained from customer service by requesting the module specification sheet.This document only represents the product knowledge and parameters at the time of editing, and any changes in the future will not be notified separately.Gray caseProduct Features:1. Precise adaptive design, specially customized for ESP32-S3 development board, ready to install and use with tight seams2. Screw hole installation, standard with 2 keycaps, user-friendly interaction details, easy disassembly and maintenance3. Pre installed antenna holes and Type-C openings, balancing external antenna expansion and ease of burning4. Open GPIO pin design, free wiring stacking and expansion, convenient circuit connection5. Adopting high-quality materials and craftsmanship, effectively resisting dust intrusion, balancing lightweight and protective propertiesProduct Parameters:Product Name: Development Board Shell KitColor: GrayMaterial: PlasticInterface: Type C interfaceTemperature range: -10 ° C~55 ° CShell size: 89x32.7x16.7mmApplication:1. Compatible with 44Pin ESP32-S3 development board, capable of external antenna and GPIO pin expansion, etc2. Modular deployment can be carried out to place various sensors or components, achieving a clean installation methodNote: This product only has an outer shell and does not include other productsShipping List:Shell * 1Screw * 3Button cap * 2