AC 220V Relay Wireless Remote Control Switch System RF 433Mhz Transmitter On Off for Water Heaters Ceiling LED Lamp

RF Wireless Remote Control Switch 433Mhz AC 220V Relay for Light Lamp Water Pump Door Access SystemFeaturesConvenient to install and easy to use.It can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every device connect with the relay receiver through the remote control.It can be used in lights, pump, wireless security alarm, fan, lamp, wireless door alarm, ventilation device, monitor, printer, fountain, etc.The wireless signal can pass through walls, floors and doors; Max range is up to 328ft with no obstacle.Stable performance and low-power consumption, long service life.Remote controlOperating Settings:Working Mode:Momentary: Relay: Press and hold -> On; Release -> Off.Toggle: Relay: Press -> On; Press same button again -> Off·Latched: Relay: Press -> On; Press other button -> Off.Delay time :Press remote control button, the corresponding relay actuates and keeps working until the time out.How to Reset?Long press the learning button for about 8 seconds until the indicator light flashes, succeed.After reset, all transmitters will no longer function and need to learn again.How to set Latched Mode?Press the Learning Button 3 times, the Led indicator flash 3 times, then press button A, after 3 seconds then press button B, the Led indicator flash for 3 times, learning succeed.We set Latched Mode as default mode, if you want to set other mode, please check user manual for reference.About Receiver Operating Voltage: AC 220VReceiving Range: 328ft (Open space)Operating Mode: Momentary/Toggle/Latched/Delay modeRF Frequency: 433MHzDC Encoding Type: Learning codeRF Channel: OneTransmitter Support: Max 26Input Terminals: Live (L) and Neutral (N) electrodesOutput Terminals: Live (L) and Neutral (N) electrodesCase Construction: ABS Plastic