MAKERVY Brass Battery Terminal Adapter Positive Negative Hexagon Base Brass Battery Post Extender High Quality M8 External Thread Car Battery Connector

Size:M8 Part Name:Battery Adapter Terminals Color:As shown in the figureMaterial:Brass
Name:Battery Terminal Adapter Description: High conductivity solid brass,low resistance brass body, stably transmit large current for heavy power loads. The high crank conversion posts will convert the regular 8mm bolt thread (usually suiting the use of ring terminals) into a set of high cranking posts. Use heavy battery terminals (for the use of larger inverters or multiple distribution points) The M8 post will screw in place of the normally used bolt. The post then comes equipped with an additional thread pattern to allow for the originally bolt to be used in the top of the post if desired. It is recommended to not tighten the posts too tightly when fitting. hand tighten the post and then use a paid of pliers to just tighten the grip slightly.

This terminal will fit: Thumper RB12-120 (Std for AGM) Thumper RB12-100 (Std for AGM) Thumper EXT120 (Extreme for AGM) Thumper EXT100 (Extreme for AGM) Full river batteries that use a 8mm thread - please check listings per battery Any Deep cycle battery with an 8mm thread

Package including:2*High crank conversion terminal posts

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.