Aideepen | 220V-240V 1 Way 4 Way Touch Sensor Switch Control Modules Desk Light Parts Touch Control Sensor Dimmer for Bulbs Lamp Switch

Product Features:1. The product is made of high-quality materials with guaranteed quality2. Stable product performance and long service life3. Suitable for table lamps, floor lamps, bedside lamps, mirror lamps, etc. with metal bodies4. The product wiring operation is very simple and easy to understand5. It can ensure the safe use of electricity for users, with a surge absorber that can effectively prevent external interferenceProduct Parameters:Name: Touch switchMaterial: PVCColor: BlackSpecifications: 45mm in length, 35mm in width, 15mm in height, and 85mm in wire lengthWorking voltage: 220V-240V 50/60HZLoad power: 15-85W (max)Product usage instructions:1. There are four levels of dimming for human touch dimming. When the human body touches any part of the metal lamp body, the light will turn on. It will be slightly lit once, then touch again to increase the brightness, reach the maximum brightness three times, and turn off the light the fourth time.2. It eliminates the trouble of finding a switch at night. It uses human static electricity to trigger an internal chip to control the change of light, and is the core component of the light function.3. It can ensure the safe use of electricity for users, with a surge absorber that can effectively prevent external interference.4. Suitable for table lamps, floor lamps, bedside lamps, mirror lamps, etc. with metal bodies.5. Wiring method:Connect the red wire to the input (i.e. plug) live wire; The black wire is the common neutral wire (connected to the neutral wires of the input and output bulbs respectively), and the white wire is connected to the output live wire of the light source (i.e. bulb); The yellow wire with ground wire ear should be fixed on the metal tooth rod (which is the metal part of the lamp base made of iron or stainless steel) and should not be connected to plastic.Load type: ordinary incandescent bulb/ordinary halogen bulb (suitable for ordinary light bulbs and low-power bulbs)Within 1A 80W and 3A 280W, only black filament bulbs can be used, and LED and energy-saving bulbs cannot be used.Shipping List:Sensor X1