1:1 Gray White Two Part AB Epoxy Glue Metal Casting Repair Adhesive

Two-Part AB Metal Casting Repair Epoxy Glue

Basic Info

Component A: Gray paste

Component B: Off-white / milky white paste

Mixing ratio: 1:1 equal volume by double tube push out

Product Features

1:1 Double Tube Easy Mix Design

Directly extrude gray and white glue in equal proportion, no extra measuring tools needed, convenient construction.

Ultra-high Bonding Strength for Metals

Strong adhesion on cast iron, aluminum, steel, copper, alloy castings; cures into hard solid block.

Excellent Comprehensive Resistance

Waterproof, oil-proof, high temperature resistant, anti-corrosion, acid and alkali resistant, not easy to crack or fall off in harsh environments.

Machinable After Full Curing

Completely hardened glue can be drilled, tapped, polished, lathed, sanded and painted for secondary processing.

Fills All Kinds of Casting Defects

Perfect to repair sand holes, shrinkage cavities, cracks, breakages and leak holes on metal workpieces.

Application Scope

Cast iron/aluminum alloy casting crack, hole and defect repair

Water pipes, oil tanks, radiators, pump bodies, valve body leak sealing

Mechanical equipment base, engine housing broken parts bonding

Hardware mold, metal workpiece breakage filling & restoration

Operation Steps

Grind the repair surface thoroughly, remove rust, grease and dust, keep clean and dry.

Push the double tube gun to extrude equal gray A glue and white B glue.

Fully stir the two pastes evenly within 3 minutes (short operable time).

Apply mixed glue onto the repairing area and smooth the surface.

Initial curing in 30 minutes, fully cured with maximum strength after 24 hours.

Package

1 double-barrel tube AB casting repair epoxy glue

Notes

The mixed paste cures quickly, prepare work before mixing.

Store in cool dry place, avoid high temperature and sunlight.

Avoid direct contact with skin and eyes; flush with clean water immediately if touched accidentally.