IRIN | Electric Guitar Pedal Power Supply IRIN PW-2 Guitar Effect Pedal Power Supply 10 Isolated Output Anti-interference 9V Output

IRIN PW-2 Guitar Pedal Power Supply 10 Isolated Output 9V 18V/5V USB Output Protection Electric Guitar Parts & AccessoriesFeatures:Portable guitar effects power supply station designed for being used with guitar pedalboard.10 isolated DC outputs: the 1st to 7th output DC 9V 300mA, the 8th output DC 9V 500mA, the 9th and 10th output DC 9/12/18V adjustable voltage, 500mA current.Each output has separate short-circuit and over current protection, safe and reliable to use.Each output DC output has a LED indicator light for you to check the working status.With one DC 5V 1000mA USB output, can be used for LED light, mobile phone and so on.●Fully independent isolated power supplies provide quiet, noiseless DC power for a variety of pedal types while taking up less space.●Whether you need a space-saving solution for a small travel pedal board or to power a small ,well-chosen and durable powersupply. This one is able to meet your needs.●This power supply has 10 outputs, each fully isolated to eliminate annoying ground loop noise. 1 USB output 5V/800mA,1x18V/100mA,2x9V/500mA,2x9V/300mA,4x 9V/200mA to provide powerful power to your products.●Power supply each interface is equipped with LED lights, in a variety of environments can clearly know the use of the situation.●The power supply has a built-in buffer effector, which can maximize the work of other devices, so that the devices can work properly.1.DC18V input port, plug the output of power adapter into here, the indicator light is orange, the indicator light is off when short circuit or incorrect polarity.2.18V/100mA DC output socket, the maximum output current of the external positive and internal negative port is 100mA,the indicator light is green when normal; the indicator light is red when the power supply is stopped in case of serious overload orshort circuit.3.9V/500mA DC output socket, maximum output current500mA at the external positive and internal negative ports, the indicator light is green under normal condition; the indicator light is red when power supply is stopped in case of serious overload or shortcircuit.4.9V/300mA DC output socket, maximum output current 300mA at the external positive and internal negative ports, the indicatorlight is green under normal condition; the indicator light is red when the power supply is stopped in case of serious overload or short circuit.5.9V/200mA DC output socket, maximum output current of 200mA at the external positive and internal negative ports, the indicator light is green under normal condition; the indicator light is red when the power supply is stopped in case of serious overload or short circuit.6.Standard USB socket, DC +5V power output, the maximum output current of the port is 800mA, the indicator light is blue under normal condition; the indicator light is red when the power supply is stopped in case of serious overload or short circuit.* When the equipment is seriously overloaded or short-circuited,this interface is enabled in the independent protection measures. It will stop the power supply. please pull out the power supply equipment in time and check if the interface parameters are met.* BUFFER use (for use instructions only, may differ from actual operation):1: Connected in the middle of the guitar and other effects; so as to suppress the loss of signal and external interference caused by the excessive length of the wire;2. Connected in the middle of the effects and speakers, so as to enhance the tone of the equipment connected before the BUFFER and eliminate unnecessary noise;3.Add a BUFFER effect to the head and tail of the effects chain respectively;4.According to the tone preference, you can choose to turn on or off BUFFER.Packing listPower supply * 1DC Cable * 9AC Adapter * 1Owner's manual * 1