Aideepen | 300W High Power Boost Step Up Power Module DC-DC 15A DC5-24V To 15V20V 24V 30V Adjustable Power Protection Board Conversion Rate

Features:1. Supports 5–24V input; output voltage can be switched between 15V, 20V, 24V, and 30V via a short-circuit connection2. Conversion efficiency of over 95%; excellent heat dissipation ensures no overheating even during prolonged full-load operation3. The module features over-temperature protection and robust performance, capable of meeting high-power boost requirements4. Utilizes high-frequency capacitors, high-efficiency control chips, and high-current MOSFETs for stable performance5. Built-in overvoltage and over-temperature protection, with TVS diodes on both input and output, ensuring safety and reliabilityProduct IntroductionThis product is a high-performance, high-power-density boost module. It utilizes a high-efficiency control chip and high-current MOSFETs, combined with high-quality ECP inductors, enabling the module to continuously deliver 300W of power at a 24V input and 30V output. Equipped with over-temperature protection and robust performance, it meets high-power boost requirements.Suitable for various fields such as automotive electronics, industrial control, and telecommunications equipmentProduct SpecificationsInput Voltage: DC 5–24V (must be lower than the output voltage)Input Current: 15AOutput Voltage: 15V, 20V, 24V, 30V (default 15V; other voltages selected by shorting pins)Output Power: 300WQuiescent Current: 3mAModule PinsVIN+: DC input positive terminalGND: DC input negative terminal, connected to the output negative terminalOUT+: DC output positive terminalEN: Boost enable pin; boost is enabled by default; connect to GND to disable boost (only disables boost)By default, the EN pin requires no connection. To disable boost, simply pull the EN voltage down to 0V. Note that in this state, boost is disabled but an output voltage remains, approximately equal to the input voltage.Package ContentsBoost module × 1