[New Arrival] DJI SDR Transmission 2 | 1 TX to 8 RX With Control | Auto Channel 2.0 Ultra-Stable Feed | TX/RX Switchable

  • 1 TX to 8 RX With Control, Multi-Group Transmission/Multi-Group 1-to-8 Monitoring/More Reliable for Larger Sets: For the optimal transmission experience, it is recommended to operate no more than five transmitters simultaneously in the same area. DJI SDR Transmission 2 cannot be cross-connected with other DJI video transmission products.* Auto Channel 2.0: Auto Channel 2.0 activates when Channel Mode is set to Auto.* DCI 4K Monitoring/HDR: DCI 4K/60fps HDR requires connection via the HDMI or DP port (bottom USB-C port) on the transceiver main unit.* Frequency Hopping: The 5.8 GHz and DFS frequency bands are prohibited in certain countries/regions. Check local laws and regulations for more information. 5.600-5.650 GHz is not used.* Up to 4 km Range (DJI SDR Transmission 2 Max Transmission Distance)/Reliable Long-Range Link: The up to 4 km range was measured under CE compliance using one TX and one RX in open, unobstructed, and interference-free controlled conditions.* Latency as Low as 35 ms: Camera and screen display latency are not included. Measured when shooting 1080p/60fps and 4K/60fps video.* 3 km (DJI SDR Transmission Max Transmission Distance): Measured in Control mode, with Broadcast mode turned off.* 50 Mbps (DJI SDR Transmission 2 Max Encoding Bitrate): The maximum encoding bitrate is 50 Mbps, measured under controlled conditions. Actual encoding and transmission bitrates may vary depending on the environment and transmission distance.* 20 Mbps (DJI SDR Transmission Max Encoding Bitrate): Measured in Control mode, with Broadcast mode turned off. Actual bitrate may vary depending on environment and transmission distance. Refer to the actual experience.* SDI Port: The SDI port is available on the DJI SDR Transmission 2 Expansion Plate, which is sold separately.* Ronin Ecosystem/RS series/ DJI RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, and Master Wheels: Supported models include DJI RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, and Master Wheels. Please note: When using with Ronin 2 or Master Wheels, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to 4-pin) is required (sold separately). When using with RS 4, RS 4 Pro, or RS 3 Pro, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to CAN) is required (sold separately). Refer to the official product page for details.* Osmo Action and Pocket: Supports Osmo Action 6 and Osmo Pocket series (Osmo Pocket 4 and later) via USB-C for monitoring and power supply.* Mobile Feed/DJI Ronin App Monitoring Assistance Tools: Connect the transceiver (RX) to a smartphone or tablet via USB-C cable. Cable is not included.* PTP Camera Control: For details, refer to the Camera Compatibility List at the top of the official product page.* Be powered by a standard PD protocol charger: A PD power adapter with an output of 65 W or above is required.* Stronger interference resistance, better image quality, and greater range: Compared to DJI SDR Transmission, this product features the upgraded Auto Channel 2.0, delivering better transmission performance when multiple groups of transmitters and receivers operate simultaneously. It supports video quality up to DCI 4K/60fps with a maximum encoding bitrate of 50 Mbps, and a transmission range of up to 4 km.* App Monitoring: Connect the transceiver (RX) to a smartphone or tablet via USB-C cable. Cable is not included.* 15 V/9 V: The input voltage is 9 V when powered via the three bottom USB-C ports on the DJI SDR Transmission 2 Expansion Plate (SDI/HDMI/USB-C). It is 15 V when powered via the transceiver's two USB-C ports or the right-side USB-C port on the Expansion Plate.1. For the optimal transmission experience, it is recommended to operate no more than five transmitters simultaneously in the same area. DJI SDR Transmission 2 cannot be cross-connected with other DJI video transmission products.2. Auto Channel 2.0 activates when Channel Mode is set to Auto.3. The 5.8 GHz and DFS frequency bands are prohibited in certain countries/regions. Check local laws and regulations for more information. 5.600-5.650 GHz is not used.4. DCI 4K/60fps HDR requires connection via the HDMI or DP port (bottom USB-C port) on the transceiver main unit.5. Measured under CE compliance using one TX and one RX in open, unobstructed, and interference-free controlled conditions.6. Camera and screen display latency are not included. Measured when shooting 1080p/60fps and 4K/60fps video.7. Measured in Control mode, with Broadcast mode turned off.8. The maximum encoding bitrate is 50 Mbps, measured under controlled conditions. Actual encoding and transmission bitrates may vary depending on the environment and transmission distance.9. The maximum 20Mbps encoding bitrate was measured in Control mode, with Broadcast mode turned off. Actual encoding and transmission bitrates may vary depending on the environment and transmission distance.10. Supported models include DJI RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, and Master Wheels. Please note: When using with Ronin 2 or Master Wheels, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to 4-pin) is required (sold separately). When using with RS 4, RS 4 Pro, or RS 3 Pro, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to CAN) is required (sold separately).11. Supports Osmo Action 6 and Osmo Pocket series (Osmo Pocket 4 and later) via USB-C for monitoring and power supply.12. The SDI port is available on the DJI SDR Transmission 2 Expansion Plate, which is sold separately.13. Connect the transceiver (RX) to a smartphone or tablet via a USB-C to USB-C or USB-C to Lightning cable. Cable is not included.
DJI Singapore

DJI Singapore

Seller ratings 98%

Review

Oops
This video has no reviews.