Zigbee3.0 Smart Soil Moisture Sensor with App Remote Monitoring and Temperature Humidity Detection for Housing Garden

Note:Compatible zigbee hub is required ,they cannot work alone without related gateway. For Tuya zigbee: Both Support Zigbee2mqtt and Tuya/Smart Life App, but must be use a Tuya zigbee gateway/hub, cannot work with wifi directly. Tuya Smart/Smart Life only displays air temperature and soil moisture to use more features,please connect via Zigbee2Mqtt or Home Assistant. Do not support for voice control with Alexa or google assistant.Features:3 In 1(For Tuya zigbee): Soil moisture detection +Air temperature + Air Humidity Need to work with Tuya Zigbee Gateway,Also compatible with Zigbee2mqtt on Home Assistant via related gateway. Not support for ZHA(Zigbee home automation ).Specification:Zigbee 3.0 Soil moisture sensor Battery Type: 2 x LR03 AAA(The batteries is not included in package) Wireless Protocol: Zigbee 3.0(need zigbee gateway/hub) Soil Moisture resolution: 3% Temperature Resolution: 0.1℃ Humidity Resolution: 3% Working Voltage: DC3V Standby Current: ≤20uA App: for Smart Life,for tuya app Do not support for alexa or google assistant voice ,No voice controlInstallation Instructions:1. Before inserting the sensor into the soil,please ensure that the surface of the "soil moisture sensor" is clean. 2.Insert the sensor into the soil for no less than 2/3. Ensure that the sensing surface of the moisture sensor is in contact with the soil. 3. After insertion, wait for about 30 seconds~ 1 minute to detect the moisture level. 4. When the moisture value differs by 3%, the air temperature value differs by 0.3°C, and the air humidity value differs by 5%, the data will be uploaded to the APP.Question: Can't add device to zigbee2mqtt?Answer :It has something to do with the Zigbee2MQTT version,your z2m is old version and have not been updated. Please update the version to newest Zigbee2MQTT version , then reset and add device on Zigbee2mqtt. After add device ,you can install all sensors to soil and put some water ,wait for a while ,then press the button on sensor ,then the data will update .