Aideepen | Newest 5V 12V 4-Wire PWM Fan Temperature Controller Smart Fan Temperature Controller with 343 Combination Modes Quiet Efficient

Product Features1. Suitable for 5V/12V four wire fans, compatible with multiple scenarios2. Automatic speed regulation based on temperature, low speed silent, full speed heat dissipation3. Users can customize the startup temperature/startup duty cycle/full speed temperature difference4.343 combination modes, suitable for various differentiated scenarios5. Four wire PWM precise speed regulation, quiet and efficientProduct SpecificationsProduct Name: Fan Temperature ControllerSupport fan: 5V/12V standard four wire PWM fan (does not support 2/3 wires)Input voltage: 5-15V (direct input/output, pay attention to fan withstand voltage)Fan current: less than 2A (for high currents, it is recommended to connect the fan interface to the power supply)Fan terminal: MX2.54 3+1P half backrest (B3 terminal)Standby power consumption: 10mW (5V); 25mW（12V）Temperature probe: NTC 50K B=3950PWM signal: 25KHz Vpp=5VTemperature control strategy343 combination modesParameter settings: startup temperature, startup ratio, full speed temperature difference1. Startup temperature: {35, 40, 45, 50, 55, 60, 65}//Default 45 ° C2. Startup ratio: {20, 25, 30, 35, 40, 50, 60}//Default 25 ° C3. Full speed temperature difference: {5, 10, 15, 20, 30, 40, 50}//Default 20 ° CDelayed shutdown: Stop running when the temperature drops to 3 ° C below the starting temperatureFor example, the starting temperature is 45 ° C, the starting ratio is 25%, and the temperature difference at full speed is 20 ° C. That is, when the temperature rises to 45 ° C, the fan starts at 25% and reaches 65 ° C (45+20) at full speed. When the temperature drops to 42 ° C, the fan stops.Packing ListTemperature control speed regulator * 1Epoxy resin probe 10CM * 1