4PCS 52940-L1100 TIRE PRESSURE SENSOR for 2020-2024 Hyundai Elantra Sonata DN8 KIA Seltos Tire Pressure Monitor Sensors

Set 4Pcs for Hyundai/KIA Tire Pressure Monitor Sensors 52940-L1100 (Color Black)Product DescriptionPACKAGE CONTENT : 4PCS TPMS SENSORBattery Life: ABOUT 5YEAR【Reference OE Part Number :52940-L1100Sensor Operating Frequency: 433MHzDescription: Fit For Hyundai Sonata DN8 2019, 2020. For KIA Seltos 2019, 2020        Condition:New 【Learning Process Guide】 : AUTO RELEARN (NOT NEED OBD TOOL) .   (more information pls contact us. )Installation of TPMS is recommended to be performed only by trained professionals.   COMPREHENSIVE VEHICLE COVERAGEFor EUROPE MARKET:FOR Hyundai Elantra [CN7] (from 2020-06 to 2026-09)FORHyundai Ioniq 5 [NE1] (from 2021-06 to 2022-12)FORHyundai Ioniq 5 [NE1] (from 2023-01 to 2027-09)FOR Hyundai Sonata [DN8] (from 2020-01 to 2024-12)FOR Kia Carnival [KA4] (from 2021-03 to 2027-01)FOR Kia Ceed [CD] (from 2024-01 to 2026-04)FOR Kia Ceed [CL4] (from 2025-10 to 2031-03)FOR Kia K5 [DL3] (from 2021-01 to 2027-06)FOR Kia Optima [DL3] (from 2020-06 to 2028-12)FOR Kia PV5 [SW1] (from 2025-11 to 2036-03)FOR Kia Seltos [SP2] (from 2019-11 to 2026-09)FOR Kia Sorento [MQ4] (from 2020-09 to 2026-12)FOR USA MARKET:FOR Hyundai Elantra (from 2020-11 to 2026-12) FOR Hyundai Ioniq 5 (from 2021-06 to 2029-06) FOR Hyundai Kona (from 2023-06 to 2027-12) FOR Hyundai Santa Cruz (from 2021-08 to 2028-06) FOR Hyundai Sonata (from 2019-11 to 2032-12) FOR Hyundai Tucson (from 2021-02 to 2027-06) FOR Kia Carnival (from 2021-03 to 2024-12) FOR Kia K4 (from 2024-08 to 2030-10) FOR Kia K4 (from 2024-09 to 2030-08) FOR Kia K5 (from 2020-07 to 2033-01) FOR Kia Seltos (from 2020-01 to 2026-12) FOR Kia Sorento (from 2020-09 to 2027-11) FOR Kia Sportage (from 2022-03 to 2028-04) Notice: PLEASE DOUBLE-CHECK THE PART NUMBERS ON YOUR EXISTING Sensor.  ■ Installation Process for reference only :1. Loose the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.