30W 50W 100W Portable UV curing lamp without shadow resin ink screen printing fluorescence detection and curing lamp

Manual measurement may be a few centimeters away from the actual distance.We describe the luminous effect power, not the voltage power.【Product Features】Cold light source, no heat radiation, low temperature rise on the surface of the illuminated object, solving the traditional thermal damage problem. Especially suitable for liquid crystal edge sealing, film printing, etc.;[Usage method] The LED UV lamp needs to be as close to the surface of the cured object as possible. The closer the distance, the better. It is best to keep it within a distance of 0.5-1 cm. Too far irradiation distance will seriously affect the curing effect;Different coatings will take the same time to cure[Scope of use] UV curing (shadowless glue\ink\resin film), photochemical catalysis, medical physiotherapy, aging test, UV printing, plastic printing, diazo copier, mobile phone LCD screen, etc.【Tips】To achieve the best curing effect, you must pay attention to two points:1. The wavelength of the light curing agent contained in the UV glue must be the same as the wavelength emitted by the UV lamp;2. The ultraviolet energy emitted by the UV lamp must meet the energy required for UV glue curing;3. For the single-shot movable bracket, please be sure to inform the specific size, because there are too many sizes, otherwise there is no way to ship.1.UV Colloid Curing Lamp2.plug converter is free(According to the type of plug in your country).If you need other power or other models of product,please feel free to contact us, we will match the products for you.Dear buyer, please feel free to contact us for any questions. Enjoy your online shopping!