EELHOE | 100g Multi Purpose Paste Chassis Rust Inhibitor Converter Repair Car Anti-rust Rust Remover Iron Metal Surfaces Maintenance

DescriptionAnti-rust primer, rust-free primer, car rust converter, metal refurbishmentIt can make your car chassis rust freeChassis Rust Remover removes existing rust and converts it into an inert coating that seals in moisture and prevents rust and corrosion on iron and metal surfacesNo more scraping, sandblasting or sanding! Just brush it on and wait!This all-in-one surface conditioner and primer creates a protective black polymer barrier that is weatherproof and will give your car's undercarriage a fresh coat of black paintA non-toxic, non-fuming formula, it is a non-flammable, low VOC, water-based treatmentApplicationSimply remove large rust and dirt particles with a wire brush or sandpaper before useRemoving dirt, dust and grease before using this product will be more effectiveShake or stir well before use and apply two coats with a brush, roller or pump sprayer with a minimum of 20 minutes drying time between coats. Allow 48 hours curing time before applying high quality paintNotes.GENERAL: Do not use this product if the surface temperature is below 50°F.Clean up: to remove should be washed immediately with soap and waterStorage: In a cool, dry place to prevent freezing or temperatures exceeding 100°F.For long-term protection of iron surfaces, the cured rust inhibitor coating should be sealed with two coats of a high quality oil-based paint. No other primer is required.