Super TFT For Samsung Galaxy S20 4G LCD Display Touch Screen Digitizer Assembly With Frame For Samsumg S20 5G Replacement Parts

Super TFT For Samsung Galaxy S20 4G LCD Display Touch Screen Digitizer Assembly With Frame For Samsumg S20 5G Replacement PartsAbout the products:1.This item is compatible with:  For Samsung Galaxy S20 4G LCDModels: SM-G980, SM-G980F, SM-G980F/DSFor Samsung Galaxy S20 5G LCDModels: SM-G981, SM-G981F, SM-G981F/DS.SM-G981B/DS, SM-G981U, SM-G981U1, SM-G981N,SM-G981B, SM-G9810, SM-G981W, SC-51A, SCG01Package List1 X Display Screen Assembly1 X Full Set of Professional Installation ToolsNo Frame Assembly VS With Frame Assembly1.No Frame ScreenOnly integrated touch and display panel without middle frame. You need to transfer your original phone middle frame manually. Complicated disassembly steps required, not recommended for DIY beginners.2.With Frame ScreenTouch screen, display panel and matched middle frame are pre-assembled integrally. Support direct plug-and-play replacement, greatly saving installation time and difficulty.Important Pre-Purchase TipThis is an aftermarket replacement screen instead of original official part. Slight differences on brightness, color rendering and screen texture may exist. Please place your order carefully if you are sensitive to minor visual differences.Pre-installation RemindersAll screens pass strict full-function factory inspection before shipment, with shockproof foam package for safe transportation. Each screen is attached with an exclusive MS identification label to realize full product traceability.Mandatory Pre-installation Bare Test Rules (Must Read)Please follow the unified test rules strictly before formal glued installation:1. Keep labels and film intact: Never tear off the original protective film and MS labels during the whole test process. Mobile screens are delicate precision parts. Please finish loose cable test before formal bonding installation.2. Standard Test Steps: Only connect the screen flex cable to phone motherboard loosely. DO NOT buckle the screen into middle frame or apply any glue. Power on the phone to fully test brightness, touch sensitivity, color uniformity, screen lines, dead pixels and fingerprint function. Proceed to formal installation only if all functions work perfectly.3.Damage Warning:Never squeeze, press heavily or bend the screen flex cable and chip area. Improper operation will cause permanent and irreversible screen damage.Assembly Procedures1. Before proceeding with the official assembly, the display cable must be tested in isolation; assembly without prior testing is strictly prohibited.2. Before performing any disassembly, be sure to remove the phone’s battery to prevent short circuits that could damage components.3. Do not pull, twist, or bend the display cable with force.4. Confirm that all display functions are operating normally before fully reassembling the phone.Damage Prevention WarningNever squeeze, apply heavy pressure or bend the flex cable and chip area of the screen. Improper extrusion will cause permanent and irreversible damage to the screen.Additional RecommendationsIf you have no experience disassembling and repairing devices, we recommend taking it to a professional repair shop to have the screen replaced to avoid accidental damage caused by attempting to repair it yourself.