1-5PCS DITEC New GOL4 Garage Door Remote Control Command Gate Door Opener 433.92MHz Rolling Code 4channels

For Ditec Garage Remote Control Ditec BIXLS2 BIXLP2 GOL4 BIXLG4 Rolling Code Garage Remote Control 433MHz OpenerDescription:Product Model: DITEC GOL4Type of programming: Programming with the receiverProduct material: ABSSize: 60458mmProduct weight: 40 gNumber of channels: 4Battery: 3V (CR2032 Include)Installation: wirelessCode: rolling codeFrequency: 433MHz, 433.92MHzRadio transmission distance: 20-100m (Open area)Compatible Model:DITECDITEC BIXLS2DITEC BIXLP2DITEC GOL4 DITEC BIXLG4DITEC Entrematic ZEN 2DITEC Entrematic ZEN 4DITEC Entrematic ZEN2WDITEC Entrematic ZEN4WInclude* Remote Control* Battery* Keychain* English ManualHow to ProgramYou have to press a button on the receiver (under the motor cover or next to the motor in a separate box), and then press a button on the new remote to register it. Materials required for programming: your receiver!1. Open your receiver from the garage door.2. Press the programming button. Inscription is usually: ENR, MEMO or PROG.3. On some receivers, it is necessary to hold down the programming button.4. On the receiver the LED indicates the start of the programming mode.5. Press for one second on a button on the new remote control and let it go again.6. The LED of the receiver will light differently or goes out to indicate a successful programming.7. Wait a few seconds to exit the programming mode. Congratulations! Your new remote control is programmed!