2 Styles 4 Buttons ATA PTX5 V2 PTX 5V1 5V2 2V1 2V2 PTX5V1 PTX5V2 Garage Remote Control 433.92MHz Rolling Code Gate Door Opener

For ATA PTX5 Garage Door Remote Control 433.92MHz Rolling CodeFast Delivery Within 12 HoursWe are the fastest shipping seller on the platform. When we receive your order, we will send your package within 12 hours, all products will be checked individually before dispatch to ensure that the items are sent out in perfect conditionNOTE-NOTE-NOTENot compatible with ATA PTX4 series, not compatible with AOTXB series. Although this remote control looks similar to ATA PTX4 and AOTXB remote controls, it is not compatible with ATA PTX4 and AOTXB.FeaturesWhen your remote control is lost, you can buy our remote control and pair it with your receiver, after the remote control is programmed successfully, you will get a new remote controlDescription1：Frequency: 433.92MHz2：Code: Rolling Code3：Buttons: 44：Battery: Battery Included5：Programming method: programming to the receiverCompatible ModelsATA PTX2ATA PTX5ATA PTX-2V1ATA PTX-2V2ATA PTX-5V1ATA PTX-5V2---Roller Door MotorsGDO6v3 EasyRollerGDO6v4 EasyRollerGDO8v3 ShedmasterGDO10v1 ToroGDO10v2 ToroGDO10v3 ToroGDO12 HiroAnd all other compatible TrioCode receivers and motors---Sectional Door MotorsDCB-05 (Dual Gate Controller)GDO7v2(SecuraLift)GDO7v3(SecuraLift)GDO9v2(SecuraLift)GDO-9v3 (Dynamo)GDO9v3(Dominator)GDO-10v1 (Toro)GDO11v1(Ero)Tempo ATS-2And all other compatible TrioCode receivers and motor---Gate MotorsSGO-1 (Elite)SGO1v3 EliteSGO1v4 EliteNES24v1 NeoSliderNES24v2 NeoSliderNES24v3 NeoSliderNES500 NeosliderNES800 NeoSliderAnd all other compatible TrioCode receivers and motor---Industrial OpenersAxess Pro Series 3100 (Logic Console Only)Axess Pro Series 3300 (Logic Console Only)Axess Pro 1505 OverheadAxess Pro 600 SliderAxess Pro 800 SliderAxess Pro 200 SwingAxess Pro 400 Swing---ReceiversFHCRX1 Single Channel ReceiverFHCRX1v2 Single Channel ReceiverFHCRX2 Dual Channel ReceiverFHCRX2v2 Dual Channel ReceiverFHRX2 Plug-In Board ReceiverAccess to receiver required. Please make sure you got access to your receiver/opener before purchase.IncludeRemote ControlInclude BatteryEnglish ManualKeychainHow to program ?1. Press and hold the (DOOR-CODE) learn button.2. Press and hold one of the four buttons on the remote control (hold for 2 seconds), then release the remote control button (2 seconds), then press the same button again (2 seconds). The (DOOR-CODE) learning button must be pressed all the time during the operation.3. Release the learn button and remote control button.4. Press the remote control button to test.