Garage Remote Control 280-868MHz Universal Gate 433MHz 315/390MHz Opener Duplicator for Fixed & Rolling Code Transmitter Clone

1-10pcs 280-900MHz Multi-Frequency Garage Door Remote Control Universal 433.92 Electric Door Barrier Gate Sliding Door Gate OpenerHIGHLIGHT[ 4 IN 1/3 IN 1/ 2 IN 1 ] Replace your two or three or four remotes at the same time.[ Multi-frequency Duplicator ] 280mhz to 868mhz [ Three Code Clone ] Rolling Code&Fixed Code& Learning Code[ Easy to Clone ] The learning code and fixed code can be used directly after cloning, please program on the motor after the rolling code is cloned.Specifications:Product material: ABSProduct size: 633712mm/2.481.460.4"Product weight: 35 gProduct color: Grey /Yellow/BLACK/BLUE/SilverRated voltage: 3V(CR2032)Installation: wirelessLearning frequency range: 287MHz,300MHz ,306MHz ,310MHz ,315MHz, 315.5MHz ,330MHz, 360MHz ,390MHz, 410MHz, 430.5MHz, 433.42MHz, 433.92MHz, 868.35MHz, 286-361MHz, 384-400MHz.Scope of application: garage door, alarm, automatic door, rolling door, etc.For Multi-brand remote controls.1 remote control can control up to 4 different brands of remote controls.Clone 4 identical frequencies at the same time.Clone 4 different frequencies at the same time.Clone 4 different brands at the same time.Clone 4 identical brands at the same time.Each Button Supports 280-900mhz287MHz,300MHz ,306MHz ,310MHz ,315MHz, 315.5MHz ,330MHz, 360MHz ,390MHz, 410MHz, 430.5MHz, 433.42MHz, 433.92MHz, 868.35MHz, 286-361MHz, 384-400MHz.One Remote Control Four DoorsIf your remote control is a button to conltrol the door switch,our nermote control can control up to four doorsIncludedRemote ControlEnglish ManualInclude BatteryKeychainHow to use1.Press and hold button 1 and press button 2 four times at same time2.Release 2 buttons till LED flashed once every three seconds3.Put original remote in the front of new remote (about 4-5cm), press the original remote button which need to becopied until the LED of new remote flash quickly (LED have regular flashes)4.Press the button of New remote that you want to use5.if you do not copy successfully, please repeat above steps6.After copy successfully, please don't use any remote,then put the new remote close tothe receiver to active it, press and hold the button until the led of it flash quickly,thenyou can try it7.For rolling code remote control, it should programming with receiver after clone.Different way for some special remote ,Contract us.NOTEFor fixed code remotes the clone can be used immediately, for rolling code remotes the clone needs to be programmed using the programming buttons on the receiver