kebidumei | 5/10pcs 433MHz Remote Control Electric Gate Garage Door Opener Remote Control Duplicator Fixed Rolling Code Cloning Code Car Key

The chipset compability : All of Fixed code and learning code2260(All the manufacturers)2262(All the manufacturers)PT2264,5326(All the manufacturers)SC5262,HT600,HT680,HT6207,HT6010,HT6012,HT6014,SMC918 Series,527(All the manufacturers)1527(All the manufacturers)2240(All the manufacturers)Remarks: For fixed code &learning code remote controls, the duplicator will work after duplicating. But for the rolling code brand listed above, please follow the original manual to program the duplicator to receiver after duplicatingHere is the way of copyMemory clearance1.Press button 1 and 2 simultaneous until LED flashes 3 times2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly.3. Release both button, the duplicator is ready for copyingDuplicatingPut duplicator aside of original transmitter, as close as possible.Fixed code remote control:Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED flashes means the duplicating succeed.Repeat above step to the rest buttons. The duplicator will work after duplicating.Rolling code remote control:Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED flashes means the duplicating succeed.Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the receiver.If you erase the code by mistake, you can resume it by pressing and hold both of the ''3'' and ''4'' button on the remote controllers at the same time, after 10 seconds, the LED flashes 2 times and turn off which indicates the code of the copy remote controller is resumed.