Tuya WiFi Smart Energy Meter 1CH 2CH Current Sensor App Monitor Power Energy Consumption Statistics AC100-240V 80A 50/60Hz

Description:This Tuya WiFi intelligent energy meter helps measure how much energy the solar and photovoltaic system is producing and how much power it is consuming by monitoring application. Controlled by the Tuya APP, the app displays real-time power, current, voltage, power factor and frequency for channel for forward and reverse. Supports automatic setting of valve-values and with push notifications, and the device can be calibrated by adjusting the percentage.Features:1.Powerful Function: High-precise measurement, real-time monitoring of voltage, current and power of each channel when generating and consuming kilowatts. 2.Mobile phone APP Control: The app displays real-time power, current, voltage, power factor and frequency of channel for forward and reverse. 3.Power Statistics: APP program displays daily, monthly and yearly reverse and forward totals of channel individually. Power usage percentage display to avoids abnormal power usage. 4.Automation Function: You can set the power or current value in APP, only when the power or current exceeds the value, the device will starts to work. 5.Feature-rich Design: Automated setting of valve-values and push notifications, and the device is able to be calibrated by adjusting the percentage. 6.Easy Installation: 35mm rail mounting, no need to replace wires connection is safer, just put the wires in the clip and measure.FAQQ1: What should l do if l can't configure the switch module? a.Please check whether device is powered on. b. Make sure your mobile and switch module are under the same 2.4 Ghz WlFl network. c. Whether it's in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct. Q2: What device can be connected to this WlFl Single Phase Clamp? main switch,solar power generation,large machinery. Q3: What happens if the WlFl goes off? You can still control the device connected the switch module with your traditional switch and once WlFl is active again the device connected to module will connect automatically to your WlFl network. Q4: What should l do if l change the WlFl network or change the password? You have to re-connect our Wi-Fi switch module to the new Wi-Fi network accordingly as per the App User Manual. Q5: How do l reset the device? Press the reset key for about 10 seconds until the indicator light flash.