3641050-FS01 1/4pcs Tire Pressure Monitoring System For DFSK Fengon S580 S560 E3 580Pro S513 Landian E5 Landian E3 433MHz

Product Description： Note1: Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.Note2:【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by Right scan tool or "re-learning" Right Activation tool is important , if you wanna Your vehicel Relearn Procedure Description , Pls email us ...1.Stationary Relearn: Requires the vehicle be placed in the "Learn Mode".2.Automatic Relearn: For some vehicles, can be completed by driving.3.OBD Relearn: Directly writes TPMS sensor IDs to the TPMS module via the OBD connector.Installation of TPMS is recommended to be performed only by trained professionals.Specification: Condition: Brand New&High QualityManufacture Part Number:3641050-FS01Replacement Part Number:3641050-FS01Fitment Type: Direct ReplacementOperating Frequency: 433MHz Product Material:ABS+MetalBattery Life: About 3 YearColor: As the pictures showEasy to installPackage You Will Receive: 1/4Pcs Tire Pressure SensorVehicle Fitment：For DFSK Landian E3 2023/11-2025/06For DFSK Landian E5 2023/03-2025/06For DFSK S513 2020/01-2020/12For DFSK Fengon 500 2021/01-2025/06For DFSK Fengon 580 2019/01-2025/06For DFSK Fengon 580 EV 2019/01-2023/12For DFSK Fengon 580Pro 2019/08-2020/12For DFSK Fengon E3 2019/01-2023/12For DFSK Fengon S560 2019/08-2023/12For DFSK Fengon S580 2024/03-2025/06For DFSK Fengon ix5 2018/01-2025/06For DFSK Fengon ix7 2019/11-2023/12For AITO M5 2022/01-2025/06For AITO M7 2022/01-2025/06For AITO M9 2023/12-2025/06For SERES SF5 2021/04-2024/06Product Features:★Safe and Reliable --- It is suitable for monitoring the internal pressure,temperature and other information of the tire,avoiding traffic accidents caused by tire failure,provide you with a better safety in the driving process.★No programming required --- The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle.Order Notes:★Before placing the order,please check your car VIN code,model,year.Please view product description including the notes,or contact us.★Your vehicle will require programming after installation of new sensors (in most circumstances).★Consult your owner's manual to see what procedure is required for your particular vehicle when installing new TPMS.★If you would like some specific information on the programming procedure for your vehicle or have any other TPMS related questions we are happy to offer our expert advice!Please make sure your existing part number matches one of the numbers listed above.If the number(s) do not match,then the part will not work with your vehicle.■ Installation Process for reference only :1. Loose the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.