4PCS TPMS Sensor 36106790054 For BMW 1-Series [E80] 5-Series [F10] GT [F07] Tire Pressure Monitoring System 36106874829

Selling PointNote1:Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.Note2:【No sensor programming Required】 :The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".Simplified Relearn : OBDII requiredInstallation of TPMS is recommended to be performed only by trained professionals.SPECIFICATION :Replace For Part Number:36106790054,36106856227,36106874829Battery Life: ABOUT 3 YEARSOperating Frequency:433MHzPACKAGE CONTENT : NORMAL PACKETApplication:For Alpina D5 / D5 Bi-Turbo(from 2010-02 to 2014-02)For BMW 1-Series [E80](from 2004-06 to 2011-07)For BMW 5-Series [F10](from 2010-01 to 2014-02)For BMW 5-Series GT [F07](from 2009-09 to 2014-02)Note 1:Please confirm the OE number (part number) before purchasing and check if our product is the same as your original one. It's very important!If you are not sure, please contact us before placing an order; otherwise, we will not refund youIf you place the wrong order, no compensation will be given. Thank you very much!Note 2:No sensor programming required: The tire pressure sensor has been programmedIt is recommended that TPMS be installed only by trained professionalsPlease confirm the part number before placing an order. Thank you!Installation Process1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.FAQQ:【 Frequently of TPMS sensor】A: 433MHzQ: 【Did they tpms sensor need to make program】A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool oar "re-learning".