Motion Sensor Photocell Garage Door Infrared Sensor 12V-24V AC/DC For Sliding Gate Ir Barrier

Infrared Detector Sensor Sensitive Wired 12V/24V 15M for Gate Door Window Burglar Alarm ParkingUsed forautomatic slide door, automatic Gate Door, coil door , garage door， windows ，barrier etc.Feature【Receiver and Transmitter】Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.【Anti-interference】Narrow infrared beam (I or II) can avoid interruption by external light【Detection distance】Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-10meters).【self-detecting function】The beam produced by MICROCELL provides a self-detecting function for the sliding doors. Once the self-detecting beam is interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.Technical SpecificationWorking voltage:IncludeReceiver : 12-24V DCWorking current:Transmitter Photocell wavelength: 940nmAngle of emission:≤±5°Receiving range:> 12mRelay contact loading capacity:1A/30VDCSize:1004035mmNoteWired Infrared CounterpointSafety Instruction1.For security, please read the user manual carefully before initial operation;2.This photocell is without any fuse,so Please make sure the power is off before installation;3.Only used this system that do not cause any danger life or property during the running failure or its security risks eliminated;4.Please guarantee the products used in effective working rangePicture Display