4PCS 433MHZ TPMS Tire Pressure Sensor For Citroen C-ELYSEE 2012-2021 9802003680 9811536380

Product models are shipped randomlySensor P/N: 9802003680; 9811536380Applicable vehicle type:For Citroen Berlingo(from 2013-10 to 2018-06)For Citroen Berlingo Multispace(from 2013-10 to 2018-06)For Citroen C4(from 2014-10 to 2018-10)For Citroen C4 Cactus(from 2014-05 to 2021-04)For Citroen C5(from 2013-09 to 2017-11)For Citroen C-Elysee(from 2012-10 to 2021-12)For DS DS4(from 2014-02 to 2020-07)For DS DS5(from 2014-02 to 2018-11)For Peugeot 207 SW(from 2013-10 to 2016-03)For Peugeot 207 Van(from 2005-11 to 2014-09)For Peugeot 3008 (OU)(from 2013-09 to 2016-05)For Peugeot 301(from 2012-10 to 2022-03)For Peugeot 408(from 2012-07 to 2019-03)For Peugeot 5008 (0****)(from 2013-09 to 2016-12)For Peugeot 508 (8)(from 2013-10 to 2017-06)For Peugeot Partner(from 2014-06 to 2018-06)For Peugeot Partner Tepee(from 2014-06 to 2019-09)For Peugeot RCZ(from 2013-10 to 2017-06) Note 1 : Please confirm the part number before purchase , and check our product if the same with your old product , it's important!If you are not sure , pls contact with us before you order it ,thanks a lot !Note 2 :No Sensor Programming Required : The tire pressure sensor has been programmedspecifically for your make/model/year of vehicle , need activate them by scan tool or "re-learning" .Simplified Relearn : OBDII required .Installation of TPMS is recommended to be performed only by trained professionals Please Confirm The Parts Number Before Order , Thanks Q/AQ: How do I choose the right sensor to purchase for my vehicle?A: Read the description of each product link in detail and the vehicle list information we provide before purchasing;Check the old sensors of your vehicle and provide the part numbers and pictures of the old sensors.If you don't have an old sensor, please provide your vehicle's VIN number to our customer service, and we will recommend a suitable product for you.Q: Why doesn't the sensor work after installation?A:1) We suggest that you check whether the original old sensor part numbers of your vehicle are the same as ours before purchasing. If the answer is "No", it means they are not suitable for your vehicle.2) After most vehicles are equipped with new sensors, they need to be matched and connected to the vehicle with an OBD detection scanning tool. Ford vehicles (EL-50449 tools); GM vehicles (EL-50448 tools);Except for some products with automatic recognition functions, please contact our customer service staff for answers.Q: Why do the sensor pictures I see look the same as those of my old sensors, but they are actually incompatible?A: For two sensors with the same appearance, they have different frequencies (MHZ) and part numbers. Before purchasing a sensor, it is necessary to check the product description we provide and the list of vehicle years suitable for the sensor.Q: How can sensors be matched with vehicles using OBD detection tools?A: When replacing sensors, a suitably formatted OBDII TPMS scan tool will be required to learn new sensor IDs. And about the OBD Scan tool is Common tools in Tire Shop1. Adjust tires to vehicle placard pressure.2. Trigger left-front sensor using TPMS scan tool. Repeat for remaining sensors in the following order: right-front, right-rear, left-rear and spare if equipped.3. Turn ignition to ON (engine off). Connect OBDII cable to vehicle OBDII port and TPMS scan tool.4. When OBDII connection is made, scan tool will display that sensor IDs are uploading (or similar). Follow TPMS scan tool prompts as necessary. The process may take upwards of 1-minute.5. After ID upload is complete, disconnect the OBDII cable.6. Keep the vehicle ignition turned to the ON position and use the TPMS scan tool to trigger each sensor again.7. Drive vehicle for at least 10 minutes above 30 mph.Q: The EL-50449 and EL-50448 tools are matched with vehicles?A: Please consult our customer service. We will sincerely answer your questions