IRIN | 2.4G Wireless In-Ear Monitor System Stereo IEM with Transmitter Receiver One-Key Mono/Stereo for Live Performance & Studio

2.4G Wireless System Earphone Monitor IWH1 Rechargeable Wireless Transmission Transmitter Receiver Support Stereo Mono RecordingMain Features:-Lossless professional sound quality.-2.4GHz wireless transmission band, 24bit/48KHz sample rate.-30 meters effective distance, get rid of the cable.-Small size, strong function, unique lavalier design, can be your mini waist bag device.-Blue LED light for instructions, 1s to pair.-Built-in rechargeable lithium-ion battery that can be conveniently charged by USB.-Can ba used for 5 hours when fully charged.-Switch to choose mono/stereo,suitable for different devices.-16 levels adjustable volume buttons-5 sets of equipment can be supported to work at the same time.Specification-Sample rate: 24bit/48KHz lossless digital transmission sound quality- Wireless Band: 2.4GHZ-Delay: -Range: 30 meters outdoor or 15 meters wall distance-@ Built-in lithium-ion battery can be charged by USB-Lithium battery capacity: transmitter 780mAh, receiver 550mAh-Charging device: USB Type C charging- Signal-to-noise ratio: -98dB-Dynamic range: >105dB-Frequency response: 20 to 20K Hz, + 1dB/-3dB-Single body size (mm): 60 (L) X45 (W) X20 (H) mm-Outer packaging dimensions (mm): 132 (W) x108 (W) x 65 (H)-Weight of a single body: 50g-Packaged weight: 250g-Accessories included:wireless earphone monitor transmitter× 1,wireless earphone monitor receiver×1user manualx1, USB charging cable× 1, audio cable*2How To Use:1.Use for connecting the wireless transmitter to mobile phone or musicalinstrument, use for connecting the receiver to headphones or speakers.2.When transmitter and receiver did not plug in power supply, and the lightof them go to red, it indicates that the product has insufficient power, need tobe charged before using it.3.Pairing: turn on transmitter and receiver then long press the pairingbutton, the light of transmitter and receiver is on and not flash indicatespairing successfully.4. This wireless system product can support one transmitter to send signalsto multiple receivers. The pairing method is to turn on the all receivers, longpress the pairing button to enter the light flashing pairing mode, then turn onthe transmitter, long press to enter the pairing mode, the lights are on andnot flash indicate that the pairing is successful.5.The receiver of this wireless system product also can support recordingfunction. The transmitter can be connected to musical instruments and otherinput, the receiver can be connected to the mobile phone forrecording (Note: The required wires need to be configured by the user).Transmitter Introduction:-3.5mm input jack: connect to audio equipment such as mobile phones, soundcards, musical instruments and so on.-Power status LED: low battery shows red; charging shows red; full chargeshows blue.-Pairing status LED: flash slowly when not paired; flash quickly when pairing;light is on and not flash when paired successful.-Charging port: USB Type C charging cable for charging-Power switch: switches unit on/off-Pairing button: long press to enter pairing state-According to your input devices to select mono/stereo.MONO: guitar, bass, etc.STEREO: mobile phones, sound cards, etc.Receiver Introduction:-3.5mm output jack: connect to receiving equipment such as headphones,speakers and so on.-Power status LED: low battery shows red; charging shows red; full chargeshows blue.-Pairing status LED: flash slowly when not paired; flash quickly when pairing;light is on and not flash when paired successful.-Charging port: USB Type C charging cable for charging-Power switch: switches unit on/off-Pairing button: long press to enter pairing state-According what you needed to use choose mono/stereo.Note: The effect of the mono/stereo receiving end mainly depends on the influence of the input.-Volume button: adjust the output volume.FAQ:1.Q: Device cannot be powered on and doesn't work.A: If the device unused for a long time, or powered off during low batterybut then doesn't charge in time. The battery enters into protection modedue to low battery, and you need to charge it and activate the battery.2.Q: The device can be turned on, but cannot be used and there isno sound?A: Please check the pairing status light of the transmitter and receiver,whether the state of the device is pairing successfully or not.3.Q: Strange noise while in use.A: There can be strong electromagnetic interference, too far transmissiondistance, too many transmission obstacles, so most communications arelost. Please keep the transmission distance as short as possible.4.Q: Device cannot be charged properly.A: Lithium batteries go into protective state when they are low for a longtime, so they need to be recharged about 10 minutes to activate thebattery.5Q: Can multiple receiver receive the signal from one transmitterat the same time?A; Definitely yes. For specific operations, please refer to Instructions 4.M-vave WP-10 2.4GWireless System Earphone Monitor Rechargeable Transmitter receiver Support Stereo Mono Recording Function