PINMOAP Brake Bleeding Hose With One-Way Valve Clear Tube Quick Connect Fluid Bleeder Kit For Car Motorcycle Repair Garage Tool

Feature:This item is little bleeder - motorcycle brake bleeding kit.Bleed motorcycle brakes quickly and easily with the Little Bleeder.Internal valve prevents air being drawn into the system.Easy to use - simply connect and pump.Aluminium body to resist corrosion from brake fluid.Complete with rubber tubing.- Securely attach the two hoses onto the valve unit as shown in the picture.- Uncover the bleed nipple of the caliper.- Place the end of the hose onto the bleed nipple and secure with hose clip. - Check that the valve unit is facing the correct way,the direction of arrow on the the unit should be pointing away from the caliper.- Have a container ready to collect the brake fluid that will be flushed out of the system.- When ready,Start Pumping the brake Lever and topping up the fluid until all air has been flushed through and the fluid level is correct in the master cylinder reservoir.- Close Reservoir.- Remove the hose from the bleed nipple,clean away any excess fluid and replace cover onto the nipple.- Dispose of any excess brake fluid as per the manufacturer's instructions.- The valve unit and hoses should be taken a part and drained thoroughly,open the valve unit by unscrewing the body.Specifications:Material: Aluminium & RubberValve Length: 54mmTube Inner Diameter: 5mmTube Outer Diameter: 8mmPackage Included:1 x Brake Bleeder Tool Kit