Aideepen | ESP32-S3 WiFi BT Development Board Module 8MB PSRAM 16MB FLASH N16R8 for ESP32S3-DevKitC-N16R8 for IoT Smart Home Projects

Features:1. This development board is an entry-level board that is easy to use.2. It is simple to use and offers flexible expansion, with most of the on-board module pins routed to both sides of the board.3. A wide range of peripheral devices can be easily connected via jumpers, and the development board can be plugged into a breadboard for use.4. Featuring an on-board PCB antenna, this development board offers full Wi-Fi and Bluetooth Low Energy functionality.5. Suitable for a wide range of users, including university students, engineers, technical personnel, DIY enthusiasts and electronics hobbyists.Product Description:The ESP32S3-DevKitC-1 is an entry-level development board. Most of the pins on the on-board modules are brought out to header pins on both sides, allowing developers to easily connect various peripheral devices via jumper wires according to their specific needs; the board can also be plugged into a breadboard for use. The ESP32S3-DevKitC-N16R8 is a development board based on the ESP32S3 chip, designed specifically for high-performance and low-power applications. This development board integrates Wi-Fi and Bluetooth functionality, supports AI inference and multimedia processing, and is suitable for applications such as the Internet of Things (IoT), smart homes, speech recognition and image processing.Key Specifications:Chip Model: ESP32S3Memory Configuration:　16MB Flash (N16), 8MB PSRAM (R8)Wireless Communication:• Wi-Fi: Supports IEEE 802.11 b/g/n (2.4 GHz).• Bluetooth: Supports Bluetooth 5 BLE• 3.3 V Power On LED (3.3 V power indicator): This LED illuminates when the development board is connected to a USB power source.Processing Capabilities:• Dual-core 32-bit processor• Clock speed up to 240 MHz• Supports vector calculations and DSP instruction sets, suitable for AI inference tasks.Storage:• Built-in 512 KB SRAM.• External 16 MB Flash and 8 MB PSRAM, available for complex tasks and data caching.Interfaces and Peripherals• GPIO: Up to 45 general-purpose pins.• ADC: 14 x 12-bit ADC channels.• UART: 3 ports, supporting serial communication.• SPI/I2C/I2S: Supports common peripheral communication protocols.• PWM: Suitable for motor control or LED dimming.• USB: Native USB 2.0 support, with OTG and CDC functionality.• RGB Controller: Built-in LCD and LED controllers.Power Management• Supports 5V and 3.3V inputs.• On-board power regulator (LDO) for stable power supply.Product Contents:1x Development Board2x Header Pins (pre-soldered or unsoldered, as required)