1080P AHD Rear View Backup Camera with Fisheye Golden Lens CVBS | AHD Switchable Reverse Rear View Camera for Car SUV RV

Signal Format Compatibility:1. AHD Signal: Ensure your car monitor supports AHD signals. If it doesn’t, For Switch to CVBS and restart the camera’s power.2.AHD and CVBS For Switch: If your vehicle display does not support AHD, PLEASE cut the orange wire For Switch to the CVBS signal, then restart the camera’s power. Wire Functions (3 cable controlled features):Orange Wire: Default is AHD signal. To For Switch to CVBS, cut the wire.Green Wire: Default is Mirror mode. To For Switch to Non-mirror, cut the wire.White Wire: Default is Guideline ON. To turn off the guideline, cut the wire.Please Note: After cutting any wire, reconnect the power and restart the device for the changes to take effect. FAQ:After connecting the rear view camera, the display shows no Signal, Black Screen and No Picture, what should I do?1.Check Signal Format: Ensure the correct signal format (AHD or CVBS) is selected based on your monitor’s compatibility.2.Verify Connections: Make sure the red trigger wire is connected to the reverse light and the reverse-in cable on the monitor.3.AUX-IN Option: If your monitor supports AUX-IN, you can connect the camera to the AUX-IN port. Selecting the wrong signal standard (like PAL or NTSC) may cause a gray and white screen.NTSC is used for CVBS cameras.PAL is used for AHD 1080P cameras.Please choose the correct signal standard and restart the camera’s power.