High Clearance V3 Carbon LCG Chassis Kit for 1/10 Comp Rigs Custom Crawler Build Capra F10 Offset Portal Axle

Features:Frame rails laser cut from 3mm carbon fiber. Large skid angle for insane breakover and even more available ground clearance. Two sets of skid plate mounting holes, left & right, based on Axial 3-gear transmission or similar. Multiple universal body post mount slots. Multiple front and rear shock mounting positions for optimized shock tuning. Multiple front and rear links mounting options for wheelbase adjustment. Included carrier bearing is still fully adjustable left to right, adjustable pitch, and fwd and back via 4 mounting locations. Includes basic hardware, assembly is required.Chassis Kit Includes: 1x Carbon Rails (pair) 1x Delrin Skid Plate 1x Aluminum Carrier Bearing 1x 3D Printed Rock Sliders (pair) 2x 70mm Chassis Brace 1x 45mm Lower Link Brace 1x Nylon Spacers Kit 1x Hardware KitNote: these is a custom build application, so be prepared for problem solving as not every axles, motor, transmission that is available on the market can be accounted for all in one.Needed to Complete:-SHOCKS 80mm-90MM respectively for travel needs. No more than 90mm recomended. 82mm PN 2660/big bore shocks are a great comparable budget option as well. -TRANSMISSION compact required. EXO, Tiny Portal or NOD2 and others. -MOTOR smaller is better. Recomend small/stubby outrunner like HOLMES/3BROS/Dlux/SEQURE and others. -3x DRIVESHAFTS recomend "cut to length" in front for thier reduced shaft size for clearance and strength. Larger(normal) diameter plastic shafts can be used in rear no issue to save weight and money. -ESC compact am32 of your choice recomended. DLUX, HOLMES HOBBIES, 3BROS, SEQURE etc. -AXLES, 20% or more total OD recomended. 30% is ideal. -SERVO.