IPS Display For Samsung Galaxy A05 LCD SM-A055F Touch Screen Digitizer Assembly For Samsung A05S LCD SM-A057F Replacement Parts

IPS Display For Samsung Galaxy A05 LCD SM-A055F Touch Screen Digitizer Assembly For Samsung A05S LCD SM-A057F Replacement PartsImportant Pre-Purchase Tip:This is an aftermarket replacement OLED/TFT screen. There will be subtle differences in color rendering, brightness and texture compared with the official original screen. If you are sensitive to minor visual discrepancies, please think twice before placing an order.This product is used to replace your cracked and faulty phone screen.Package Include:1pcs LCD display screen1set of maintenance toolsPre-installation Reminders:This product has passed strict full-function factory inspection before shipment, equipped with shockproof foam packaging and a complete set of professional installation tools for repair use. All screens are printed with the MS identification logo for product traceability.Please strictly follow the test specifications before formal full installation:Do NOT peel off the original protective film and attached labels at any stage of the pre-test. Mobile phone screens are delicate precision electronic components. You must complete the loose connection test with the original protective film fully intact before permanent assembly.Mock Test Operation Steps:Loosely connect the screen cable assembly to the phone motherboard only; do not fully snap the screen into the middle frame.Power on the device and run a comprehensive function inspection, covering display brightness, touch sensitivity, color uniformity, screen streaks and dead pixels.Only carry out formal installation when all functions pass the test with zero defects.Never squeeze, apply heavy pressure or bend the screen’s flexible circuit and IC chip area. Improper extrusion will lead to permanent, irreversible damage to the screen panel.Installation Warning: Do not press the screen hard and do not over-tighten the bottom screws. Frame pressure may cause backlight white spots on the screen.Detailed description:FAQ:Q1: Why are there colored spots on the screen?Answer: All our screens are tested before shipment and function properly. Colored spots occur when foreign objects get trapped between the screen and the phone during installation, pressing against the screen IC. Disassemble the screen, clear the debris inside, and flatten the IC; the colored spots will disappear.Q2: Why is the screen black, unresponsive, randomly touching, or flickering?Answer: Touch failure is caused by incorrect installation of the flex cable. Power off the phone by removing the battery, reposition the flex cable properly, then restart the device.Q3: Why does the screen show distorted or overlapping images?Answer: This issue is caused by dust and foreign matter on the flex cable connector. Simply wipe the connector clean.Q4: Why does the screen display a pink tint?Answer: The pink hue results from customized color display settings. Reset the color mode to default in your phone’s Settings.Q5: Why is the screen loose after installation?Answer: Looseness happens due to insufficient adhesive applied during installation or inadequate curing time after gluing. Reapply adhesive and leave the phone undisturbed for 12 to 24 hours before use.Note: If you have any questions, please contact our customer service!Warranty:1. Once shipment arrived, please CHECK if the products in GOOD condition. If any damage of the package please do not accept the package and feedback to us.2. All the products,6 months warranty,brand new and strictly tested before shipment. Please DO NOT INSTALL before Testing(ONLY Connect LCD to mainboard for testing). Please inform us WITHIN 3 DAYS after receiving the parcel if you are dissatisfied with products (Real pictures, videos and other evidence must be given, escpecially the "MS" tag to prove you bought the item for us), then we will offer replacement /refund services. WARRANTY VOID if LCD damaged after Installation. Order Non-Refundable! If you are satisfied with the products after testing. THEN you may install on your phone.3. IF LCD Already Installed and find some issue. Please send us back within 3 days. If the LCD is NOT broken or damaged, we will send you the replacement (The return shipping fee will be paid by you, we will pay the shipping fee for resending.)4. If the item is your possession more than 7 days, it is considered used /second –hand, we will Only offer replacement service after we get your return item.Critical After-sales NoticeIf you tear off the original protective film before finishing the loose pre-test, we cannot confirm the original factory delivery state of the screen. Any subsequent artificial damage will not be recognized as factory quality defects, and related after-sales claims will not be supported.