begrint | For Flashforge AD5X AD5M AD5M PRO 3D Printer Cold Plate 235x235mm Magnetic Sticker Lower Power Lower Temp Bed for PLA PETG

Cold Plate For Flashforge AD5X/AD5M/5M PRO 235x235mm Magnetic Sticker Lower Power Lower Temp 3D Printer Heated Bed PLA PETG Specification：Size:235x235mmCompatible with:For Flashforge Adventurer AD5M, 5M Pro and AD5XDouble sided:both side can be printing.Cold Print Material Compatibility:Compatible only with PLA and PETG, offering extremely goodThe corresponding temperature PLA: 40-50℃; PETG: 60-70℃Feature:1. Double-sided printing The spring steel sheet comes with two sides , the above and below sides can be used to print, which makes you take full advantage of it. It is very convenient and practical.2. Good adhesion The build plate is adhesive, easy to get the first layer, no need the glue.3. Simple and easy to demold You only need to bend the build plate with your hands, and the model can be easily demolded without using other tools.4. Easy to maintain Make sure there is no fingerprints or dust, clean it with a wet tissue or alcohol before printing. the plate is made of stainless steel, flat and flexible, no matter how bent it is, it can return to flatnessUse Tips① There is a protective film on the surface, please remove it before use.② Before printing, make sure the build plate is clean, no fingerprints or dust.③ If you touch the plate surface and leave fingerprints, then you will find some pattern disappear, don't worry, please wipe with a wet tissue, and then dry the surface with a dry tissue, the pattern will reappear.Packing List:1Pc build plateDetailed Pictures:Q1: Which 3D printer is this cold plate compatible with? A: It is specially designed For Flashforge Adventurer AD5M, 5M Pro and AD5XQ2: What filaments work with this cold plate? Can I print ABS or TPU?A: It only supports PLA and PETG for cold printing. Recommended bed temperature: PLA 40‑50℃, PETG 60‑70℃. ABS, TPU and other materials are NOT compatible.**Q3: Can I print on both sides? Are both coating sides identical?A: Yes, double‑sided printing is available. Both sides feature textured adhesive coating with identical adhesion and demolding performance. You can flip the plate when one side wears out to extend service life.**Q4: How do I remove finished prints? Do I need a scraper?A: No scraper required. Take off the spring steel sheet after printing, simply bend the plate gently by hand, and the printed model will pop off easily without scratching the coating.**Q5: Fingerprints reduce adhesion, how should I clean the plate?A: Fingerprints and dust will hurt first‑layer grip. Wipe the surface with wet tissue or alcohol, then dry with dry tissue, the texture and adhesion will restore. **Remove the protective film before first‑time use.****Q6: Will repeated bending permanently deform the sheet? How durable is it?A: Made of high‑elastic spring steel, it bounces back flat after repeated bending and will not stay warped. Keep the surface clean and avoid sharp scratches on the coating for long‑term reuse.