Super PDR Paintless Dent Repair Kit Car Dent Removal Tool Set with Dent Puller Slide Hammer for Auto Body Hail Damage Repair

If you encounter the above problems, please choose our PDR® tool🛠️ Cost-Effective Solution – Avoid expensive body shop visits that typically cost hundreds of dollars per repair.🛠️ Full Set of Pro-Grade Tools – Comes with all necessary accessories for smooth and straightforward operation.🛠️ User-Friendly Design – Whether you're experienced or new to PDR, our ergonomically designed tools allow for easy and effective dent removal.🛠️ Built to Last – Constructed with high-strength materials for long-term use. Backed by a 2-year warranty for confident and worry-free repairs.🛠️Widely used – Works on various smooth metal surfaces: cars, refrigerators, motorcycles, washing machines, and more.Pro Set package1* Plastic Suction Puller - Black1* Metal Bridge - Silver1* 2-in-1 T-Puller1* Charging Cable Board No battery1* Black Glue Gun（EU/US/AU/UK Plug）18* Black Spacers5* Black Glue Sticks (17cm)5* Yellow Glue Sticks (17cm)1* Rubber Shovel1* Rubber Mallet1* Metal Leveling Pen (9 Tips)1* Yellow Tool Bag1* Gray Rag1* 50ml Clear Alcohol Bottle1* Set of 6 Long Black Translucent Spacers12* Black Spacers1* Instruction ManualDeluxe Set package 1* 2nd Generation Suction and Puller 1* LED Light（No battery）

1* Instruction Manual

27* Gasket

1* Black Rubber Strip

1* Rubber Shovel

40* Rubber Hammer

1* Metal Leveling Pen 9 Heads

1* Square Air Bag

1* Yellow Tool Kit

1* Black Glue Gun（EU/US/AU/UK Plug）

1* Gray Rag

1* Transparent Alcohol Bottle 50ML

1* Black Plastic Small Suction Cup

1* Strong Small Suction Cups

1* Glue Remover

1* Metal Bridge

1* T-Puller 2-in-1How to use:

1.Clean the dent with a clean wet cloth;

2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

3.Use a proper drawing gasket. Large dent requires a large drawing gasket.(Note: The larger the drawing gasket is, the larger the drawing force is);

4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

5. Fast place the drawing gasket with hot melt glue at the center of dent,press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue,pull the sliding rod backwards to pull up the dent;

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

8. Clean the repaired place with a clean wet cloth.【2in1 T-Bar Slide Hammer Tool】Suitable for larger and deeper dents that can be quickly repaired to their original shape, such as those caused by heavier impacts or collisions.【Dent Lifter Tool】Suitable for dent repair within 20cm, adjustable fixation position and distance, efficient and labor-saving.【Bridge type repair tool】Can adjust the repair space at will, suitable for all kinds of metal surfaces within 30cm.【LED wire plate】Helps locate dents as well as view the center point of the dent, using the principle of reflection to find the dent distortion in the bodywork and affix it.Note: This LED light requires batteries. Due to shipping restrictions, we are unable to ship. Please purchase them on your own. Thank you for your understanding!【Tap Down Pen】

For reshaping bumps from excessive lifting created by PDR dent removal tools. Available with different tips, use the matching tip to repair bumps.【Glue Gun】

Heats up and releases glue in 3-5 minutes and withstands long-term use up to 500 degrees Fahrenheit.