Aluminum & Stainless Steel Intercooler Piping Bead Manual Tube Pipe Tubing Beader Tool Roller Intake Fit Clamps 5/8" or Large ID

Aluminum & Stainless Steel Intercooler Piping Bead Manual Tube Pipe Tubing Beader Tool Roller Intake Fit Clamps 5/8" or Large IDFeature:NEW IN -- Upgrade Material Stainless steel,more stronger and Non rusting.1. Designed to be mounted in your vise whether mounted on a bench, wall, or floor.( Works best when secured in a vice.)2. By turning the handle on the side of the tubing crimping tool, you can form the desired crimp on the end of the aluminum tubing or copper tubing. The detachable handle is specially designed for the user, allowing you to operate it more easily.3. Form a perfect bead on tubes so that rubber or silicone hose can be more securely clamped to them.4. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing. (Note: Always apply the bead before welding.)Application:Use with 5/8"(16mm) or larger ID tubing for proper operation.For Aluminum, Steel, Copper or Stainless Steel Intercooler Pipe.For Wall Thickness of Steel/Aluminium/Stainless Steel Tube shouldn't be greater than 0.050"(1.25mm).Specification:Condition: 100% Brand NewColor: Blue/BlackPackage Contents:1 x Tubing Beader ToolNote:No installation guides are included, we highly recommend to seek professional installation.Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3cm.