ETOPOO 6Pcs Fillet Weld Set Fillet Welding Inspection Set Fillet Include Hi Lo Angle Measuring Tool

ETOPOO 6Pcs Fillet Weld Set Fillet Welding Inspection Set Fillet Include Hi Lo Angle Measuring ToolFeatures:1. They are made of stainless steel, not easy to bend and wear, never rust.2. The weld ruler, with fastening screws, can be fixed at any point which is convenient for readings.3. All gauges are ground mechanically, so the face is smooth.Specifications:Material: Stainless SteelColor: SilverMeasure: Inch and Millimeter.Cam Type Gauge:Linear Measure Range: 0-60mm (0-2 in)Curving Measure Range: 0-20mm (0-1 in)Angle Measure Range: 0-60 DegreeWeld Fillet Gauge:Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm, 25mm.Accuracy: Less Than +/- 0.5mm.Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm), 1” (25.4mm).Accuracy: Less Than +/- 1/50” .Weight: 0.32 lbHi-Lo Welding Gauge:Changes from standard to metric: Simply remove gauge body, turn scales over and replace body.Measures internal alignment of pipe after fit-up/ alignment, cuts radiographic rejects as well as of pipe before and after tacking.Application: Measure internal misalignment, fit- up gap, bevel on end preparation, the crown height of welds, fillet weld size, scribe line, socket weldsSize: (Approx.) 6.18" x 2.48"Taper Welding Gauge:Accuracy: 0.1mmWide measuring (1-15mm or 1/64-5/8 inch) range makes it a convenient tool for measuring diameters of small holes, slots, etc.With imperial gauge on one side while metric on the other sideUndercuts Checking Gauge:Range: 0-1/4''Increment: 1/64''It can check the size in 1/16'',1/8'',3/16'', 1/4''.It can check undercut depth, crown height, porosity comparison and so on.Convexity Concavity Checking Gauge:Range: 0-3/4''Increment: 1/4'' or 1/8''It can check the size of convex or concave.