Intelamp Long Battery Life 12000mAh Solar Flood Light Outdoor With Super Large Solar Panel Two Motion Sensors For Wall Yard Farm

 Motion Sensor + Linkage Induction: Each integrated solar outdoor light features an independent motion sensor. When someone approaches the sensor, it sends a signal to the solar light to turn it on in advance. At the same time, the intelamp solar security light will send a signal to trigger the same intelamp solar security light within a 100 ft radius to turn on synchronously, illuminating a larger areaHigh Brightness and Long Lighting Time: The intelamp solar light with motion sensor is equipped with a solar panel with a high conversion rate of 22.5% and a safe 12,000mAh lithium iron phosphate battery. The solar floodlight can be fully charged in 5 hours under strong sunlight to provide sufficient power. When fully charged, the brightness exceeds 3000 lmIntelligent Control: the outdoor solar motion sensor lights with remote control, you can choose a high brightness delay of 30 seconds, 3 minutes, or 10 minutes after motion detection. The remote control can also be used to turn the light on/off, adjust the brightness, and select a long-lasting lighting mode. Remote operation, no manual adjustment requiredEasy Installation and Flexible Adaptation: The solar panels and lights can be securely mounted on walls, wooden boards, or square columns and posts with sturdy mounting accessories. It features a split design (the solar panel is separate from the lamp body) and supports a maximum cable length of 5 meters to avoid blocking the lightHigh-Quality Materials, Longer Lifespan: Our solar lights are made of durable ABS material, which can withstand extreme weather conditions. The IP65 waterproof rating ensures that the security light will not fail in rain, snow, or sleet. So it can provide you with lighting even on stormy nightsLong Range Motion SensorThe long-range motion sensor solves the problem that the sensor light must be approached to light upEach set of products has 2 solar sensor remote controls. When people approach the lamp, one or more solar lamps within 65 feet will turn to high brightnessThe solar lamp itself has a sensor. When people approach the lamp, the lamp will turn to high brightness, and trigger the same type of lamp within 65 feet to turn to high brightnessThrough the remote control choose different sensing delayThe lamp is charged during the daytime. Press the ON button to ensure the lamp is on and the lamp will turn on automatically at night.Through the remote control, you can choose different sensing delay lighting times of lamps to meet different needs:30S: Short time passing3Min: General setting10Min: BBQ/workplace/Long distance activitiesThe longer the delay time, the more power is consumed. It is recommended to choose 30 seconds delay time to ensure continuous lighting on rainy days.No motion sensor modeNo motion sensor mode: The lamp works from dusk to dawn when turning off the sensor function.Brightness adjustment: The lamp has three levels of adjustable brightness 100%, 80%, and 60% for all modes.It is recommended to choose 100% in the sunny season and to choose 80%/60% in winter to ensure a longer lighting time.The chosen mode will be automatically saved and the lamp works according to thatInstallation method：The lamp has a picture-rich manual and all installation accessories to ensure a smooth installation.①The distinctive metal fixing bracket keeps an 18-degree tilt angle for the solar panel, making it unchanged for a long time to higher charging efficiency, and rain can clear the floating dust on the surface.②The solar panel can be perforated and installed on walls or strapped to posts.③The solar panel should be installed in sunlight, especially towards the south.④The lamp has a rotatable bracket for installation at any angle, such as a wall, tree trunk, post, canopy, ground, or even upside-down shooting into the sky.Note: The lamp is sealed with outdoor glue completely to achieve IP65 outdoor waterproofing, please do not try to take it apart.