【5Megapixel M12 Pinhole Lens Special IR Cut Filter Dual ICR Double Switcher IR-CUT 20mm Lens Mount Holder For CCTV IP HD Camera】

This product is suitable for network cameras, millions of HD cameras, infrared cameras, bolts and other cameras, let it cut offOr through, the name is: dual filter switcherThe main role and function:Corrects daytime polarization problems and improves nighttime brightnessworking principle:IR-CUT Dual Filter Switcher consists of: One IR Cut Filter and One Fully Permeable Filter + Electromagnetic Structure1. Product material: lower cover PC plastic + lens mount PC plastic2. Coil impedance: 22±5Ω (at room temperature 25°C)3. Drive voltage: Operating voltage: 4-12VDrive pulse signal time: 100ms4. Inductance: 430uH±5%5. Actuation direction, posture: the red wire is connected to the positive voltage, the black wire is connected to the negative voltage, and the product is switched to the infrared cut filterLight film (used during the day), on the contrary, the product is switched to the white film (night use) direction, posture: side, front, back (all-round test does not move, incomplete, interference can not)6. Checker IR-CUT test board/set voltage: 4V/set drive pulse signal time: 100ms±10ms7. Actuation mode Adopt DC voltage circuit to control magnetic rotary magnetic valve8. Static energy retention Product retains power even when no power is applied9. Normal temperature and humidity standard Temperature: +25°C±5°C, humidity 65%±20%10. Magnetic induction 1000Gs ± 10%, temperature 120 °C ± 5 °C11. Terminal White, 2Pin*1.25mm, Insertion Force 0.5KgPackage: 1PCS IR CUT