Aideepen | DC 7.4V-12V to 15-20KV High-Voltage Boost Step-up Module High-Power Arc Generator prolonged no-load operation without overheat

Product Features1. DC 7.4V-12V power supply, single lithium battery can also drive, strong applicability2. Different from the risk of breakdown of ordinary high-voltage modules under no-load conditions, this product supports long-term no-load operation without heating or burning the board3. The output terminal can be short circuited, and it will work normally after recovery, suitable for frequent short-circuit scenarios such as arc pulling experiments4. High voltage and high-power boost chip design, long-term operation without heating up, stable and reliable5. The circuit reduces the number of components and lowers the failure rate while ensuring performance and reliabilityProduct IntroductionThis module has undergone multiple upgrades and improvements, and finally developed this ultra-high voltage single-stage boost module. In traditional multi-stage voltage doubling circuits, the capacitance decreases exponentially after capacitors are connected in series, and the more stages there are, the weaker the discharge spark. This module adopts innovative technology to directly boost the voltage to nearly 20KV through single-stage boosting, with strong output current and extremely strong discharge sparks.The module has built-in load short circuit intelligent protection function, which automatically limits the current protection of the chip in case of accidental short circuit at the output end, and will not damage the device due to a surge in current. All core components are made of high-power devices, supporting long-term continuous operation with extremely low temperature rise and stable reliability.Product ParametersModule size: Length 84mm, Width 34mm, Height 36mmInput voltage: DC 7.4V dual lithium battery power supply or DC 12V power supplyMinimum operating voltage: DC 3.7V, single cell battery can also workOutput voltage: 15KV~20KVWorking time: Can work continuously for a long time, standby without temperature riseBe careful not to connect the positive and negative power sources in reverse, and the voltage should not exceed 13VPacking ListModule * 1