Black Carbon Fiber Sticker For Scania 3 Series 4 Series 1996--2004 Sleeper Control Panel Decorations Gifts for Car Enthusiasts

Fitment — Check Your Car FirstFor Scania 3 4 Series 1996-2004Please confirm your chassis code and steering side before ordering. Send VIN if unsure.Product Details and Color OptionWhy Real Carbon Fiber?Not all "carbon" stickers are the same. Ours is real 3K carbon fiber clothwith epoxy resin, vacuum-formed to factory panel curves. Most cheap listings are PVC printed film — flat look, fades in 6 months, peels at edges.Real Carbon Fiber (Ours):·Weave:True 2x2 twill, real depth and gloss·Durability: UV resistant, slower fading and yellowing compared to PVC film·Look:OEM+ sport upgrade, premium feelPVC Imitation Sticker:·Material:Printed PVC film·Weave:Flat printed pattern, no depth·Durability: Prone to fading and yellowing under sun exposure·Edge:Peels in summer heat, bubbles·Look:Cheap wrap lookProduct Features·Material:3K real carbon fiber, 2x2 twill weave, hand-polished glossy finish·Fitment:1:1 custom molded to factory panel, exact cutouts·Thickness:0.5mm ultra-thin, flush with adjacent trim, no gap·Adhesive:Genuine 3M VHB tape, strong hold, residue-free removal·Durability:UV resistant, waterproof, heat-proof (-20°C to 120°C)·Weight:Under 20g, zero impact on vehicle·Finish:Mirror-like depth, true carbon weave visible under lightBefore You Order — Important NotesAbout Fitment / Size:This trim is 1:1 custom molded to ONE specific car model. It will NOT fit other models or other model years, even if they look similar.Please confirm your car model, year, chassis code and LHD/RHD before ordering. Send us your VIN if unsure — we will check fitment for you.Wrong model ordered = does not fit = non-returnable. Please double check before payment.About Installation:Before Installation:- All soft carbon fiber products come with adhesive backing. They are soft and bendable at room temperature — NOT 3D hard parts.- Confirm the product size matches your car part BEFORE peeling anything. If wrong size, contact us for replacement before installing.- Clean the target panel: remove dust, oil, wax and water. Keep dry. Stickers CANNOT be pasted on leather or cloth interiors — if your car has leather/cloth interior, please do not buy.    -In cold weather (below 20°C), use a hair dryer to heat the adhesive backing until the product is soft and bendable BEFORE installation.Installation Steps:1. Do NOT tear off all the protective film at once. Peel off ONE corner first.2. Align the sticker with the panel, press from one side, slowly peel the film from one side to the other while sticking.3. Adjust position during peeling — do not remove and re-paste repeatedly, the glue may fail on second attempt.4. After install, press firmly for 3-5 minutes to ensure full contact.5. If bubbles appear, use the squeegee to push them toward the nearest edge. Warm the area with a hair dryer if needed.·After Installation:- Wait at least 24 hours before washing the car or exposing to water. -Do not install right after the car has been in hot sun — let the panel cool first to avoid adhesive softening and shifting.·Why Stickers May Not Stick — Troubleshooting:- Tore off all protective film at the start and tried to reposition → glue weakened. Always peel-and-stick gradually.- Panel had oil, water or wax → clean again with cloth.- Installed on leather or cloth interior → not compatible, glue will fail.·Note on Curved Edges:- When the panel edge is an arc/curved surface, the edge area may not be covered completely. This is a material property of soft carbon film, not a defect.Package Includes·1 x Real Carbon Fiber Trim Piece·1 x Adhesion Promoter Wipe·1 x Cleaning Cloth·1 x Installation SqueegeeFAQ1.Q: Is this real carbon fiber or printed sticker?A: Real 3K carbon fiber cloth with epoxy resin, vacuum-formed. Not printed PVC. You can see the true weave depth under light.2.Q: Why does the price seem higher than other carbon stickers?A: Because it is real carbon fiber, not printed PVC film. Material cost and vacuum-forming process are much higher. You get what you pay for — real weave, real durability, no cheap flat look.3.Q: How do I know if it fits my car?A: Please check the Fitment list above. If unsure, send us your car model, year and VIN — we will confirm before you order.4.Q: I ordered the wrong model, can I return it?A: Trim that does not fit due to wrong model ordered is non-returnable. Please double check before payment, or send VIN first.5.Q: The size looks slightly different from my panel, why?A: Please check: 1) Did you confirm the exact model year? 2) Is your car LHD or RHD? 3) Is the panel surface original, not modified? Any of these can cause fitment issues.6.Q: Can I remove it later without damage?A: Yes. Heat with a hair dryer and peel slowly. 3M VHB leaves no residue on factory trim. Avoid pulling hard on cold panels.7.Q: The edge does not stick well, what should I do?A: Clean the panel again, apply adhesion promoter, then warm the sticker edge with a hair dryer and press firmly. Cold surface or dust is usually the cause.8.Q: There are bubbles after install, how to fix?A: Use the squeegee to push bubbles toward the nearest edge. If still stuck, warm the area with a hair dryer and press again.9.Q: Glossy or matte finish?A: Glossy by default. Matte available on request — contact us before ordering.10.Q: Can I install it in winter or cold weather?A: Yes, but please warm the sticker back with a hair dryer for 10 seconds before peeling the 3M liner. Install indoors if possible.11.Q: How long should I wait before washing the car?A: Wait at least 24 hours after install. Avoid high-pressure water on the trim directly.12.Q: Do you offer custom orders or bulk pricing?A: Yes. We are the manufacturer. Contact us for custom shapes, colors or wholesale pricing.About UsWe are a carbon fiber product manufacturer with 10+ years experience in automotive interior trim. All products are vacuum-formed in-house with genuine 3K carbon cloth and epoxy resin, strictly inspected before shipment.Custom orders and bulk pricing available. Contact us for wholesale.Customer Service & After-SaleWorking Hours (Beijing Time, UTC+8):·09:00 - 18:00 (Mon-Sat):Online, instant reply·Other hours:AI customer service available, please leave a message. We will reply ASAP after coming online.After-Sale Policy:If you have any problem after receiving the product (quality issue, wrong fit, damage, missing parts), please contact us firstinstead of opening a dispute. We will solve it for you.·Wrong model ordered? Contact us before return, we help confirm fitment·All issues solved within 24 hours during working time