begrint | Magnetic Flexible PEI Build Plate Double Sided Spring Steel For Flashforge Adventurer 5M Pro AD5M AD5X 235x235mm 3D Printer

1PCS Build Plate For Flashforge Adventurer 5M Pro AD5M AD5X Magnetic PEI Plate Spring Steel Sheet Double Sided Printing 235x235mmSpecification:Size: 235x235mmSuitable for Flashforge Adventurer 5M, 5M Pro,  5XFeature:1. Double-sided printingThe spring steel sheet comes with two sides , the above and below sides can be used to print, which makes you take full advantage of it. It is very convenient and practical.2. Good adhesionThe build plate is adhesive, easy to get the first layer, no need the glue.3. Simple and easy to demoldYou only need to bend the build plate with your hands, and the model can be easily demolded without using              other tools.4. Easy to maintainMake sure there is no fingerprints or dust, clean it with a wet tissue or alcohol before printing.the plate is made of stainless steel, flat and flexible, no matter how bent it is, it can return to flatness.Use Tips:① There is a protective film on the surface, please remove it before use.② Before printing, make sure the build plate is clean, no fingerprints or dust.③ If you touch the plate surface and leave fingerprints, then you will find some pattern disappear, don't worry, please wipe with a wet tissue, and then dry the surface with a dry tissue, the pattern will reappear.Note:The build plate needs to be used together with the magnetic base, make sure your 3d printer already have one magnetic base sheet.Detailed Pictures:Q1: Which 3D printers is this spring steel build plate compatible with?A: It is sized 235x235mm, specially designed for Flashforge Adventurer 5M, 5M Pro and 5X 3D printers. It requires a magnetic base to work, magnetic base is NOT included in package.Q2: Can both sides of this build plate be used for printing?A: Yes, it supports double‑sided printing. Both top and bottom surfaces are available for printing, doubling service life for your daily 3D printing work.Q3: Do I need glue or hairspray for better model adhesion?A: No extra glue or spray is required. The coated surface provides strong adhesion for first‑layer printing. Just keep the plate surface clean without fingerprints or dust before printing.Q4: How to remove finished printed models from the plate?A: Simply bend the flexible spring steel sheet by hand. The printed parts will pop off easily, no extra scraping tools are needed. The steel sheet will bounce back flat after bending.Q5: Why do surface patterns disappear after I touch the plate? How to fix it?A: Fingerprints will cover the surface texture and make patterns invisible. Wipe the surface with wet tissue or 75% alcohol, then dry with lint‑free dry cloth, the original pattern will restore.Q6: What should I do before first‑time use?A: Peel off the protective film on plate surface before use. Keep the plate free of dust, oil and fingerprints. Always clean with alcohol between printing jobs for stable printing performance.