Guitar Binding Router Bit + Bearing Sets Ball，T-Cutter with Bearing Guitar Trim Cutter Tool

modname=ckeditorProduct name: Multi-function T-type slotting cutterProduct origin: Qingdao, ShandongProduct description: 22mm, 19mm, 17mm, 16mm, 15mm, 13mm 6 bearing diameters1. With 22mm diameter bearing, can be used for trimming.2. With 19mm bearing, 1.5 edge slot can be opened. This is the most used.3. With 17 bearings, you can use the open decorative groove of 2.5 wide, remove the outer edge of 1.5mm, and the fine decorative line of 1MM wide (2 thin lines of 0.5).4. With 16 bearings, you can use the open decorative groove 3mm wide, remove the outer edge 1.5mm, and the fine decorative line 1.5MM wide (that is, 3 thin lines of 0.5).5. With 15 bearings, you can use the open decorative groove 3.5mm wide, remove the outer edge 1.5mm, and the fine decorative line 2MM wide (that is, 4 thin lines of 0.5).6. With 13 bearings, you can use the open decorative groove 4.5mm wide, remove the outer edge 1.5mm, and the fine decorative line 3MM wide (that is, 6 pieces of 0.5 thin lines or colored shell edges).