KEBIDU | DC5 -12V 3.7V Mini Relay Remote Control Switch Small Contact NO COM NC Learning Button Wireless Receiver Transmitter ASK 433Mhz

Product parameters:Colour: BlackMaterial: ABSremote control:Working frequency: 433MhzDistance: Number of buttons: 1receiver:Working voltage: 5-12VWorking frequency: 433MhzSize: 402010.5mmOperation Introduction:Working Mode:Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.Clearing the Code:Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.Learning the Code:(Momentary)Press Module learning button 1 time, the indicator light is always on, then press the remote control button, the indicator light flashes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds.Learning the Code:(Toggle)Press the Module Learning button 2 times, the indicator light always turns on; then press the remote control button, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.Learning the Code:(Latching)Press the Module Learning button 3 times, the indicator light always turns on; and then press the buttons on the remote control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.