Paintless Dent Repair Puller Kit PDR100 Cold Glue Dent Pulling Tools Car Sheet Metal Hail Damage Dents Hail Pits Removal PDR Kit

Paintless Dent Repair Puller Kit PDR100 Cold Glue Dent Pulling Tools Car Sheet Metal Hail Damage Dents Hail Pits Removal PDR KitNote:1. Overheating can cause the glue to melt and not stick tightly, while overcooling can also lead to weak adhesion.2. Do not heat the glue directly.About the Cold Glue:The cole glue is perfect for normal application temperatures below 84°F/29°C.You can find the temperature suitable for your environment based on experience and multiple trials.Description:1.The WOYO Slide Hammer Dent puller kit idea for the sheet metal processing, auto body dent removal or hail damage repair.2.Easy operate to fix ding dent and hail damage repair with lowest expense in convenient way.3.Use with Cold Glue, not need to heating the glue and waste the time.4.Auto body tools slide hammer and attachments are for dent pulling, removals, can also pulls out dents in fenders, side panels.5. This type of cold glue can be reused. When you use it, make sure the dents and your fingers are clean.How to use PDR100 to remove the big dent on the car?1. Clean the car dent place.2. Choose the tabs size you need ,and then install it .3. Clean you hand, Stick cold glue on the tabs after heat the tabs.4. If your Car body is cold, we suggest you to clean and heat the dent before use the slide hammer.5. Start to repair the dent, try serveral times until cannot pull the dent.6. When the dent can't be pulled up and not been repaired completely.If the dent still have other shapes or mini dent, need to use other auxiliary PDR tools to repair it.Like PDR007 / PDR009 / Rods hook / rubber hammer / other PDR kits.7. After Finishing repairing, remove the cold glue from the tabs, confirm it clean and back to the original glue.