paint pen Suitable for Mazda 3 Pearlescent Black 16W 41W scratch remover cx4 Atz red cx5 atez car scratch repair 16W 41W Black

Origin:Mainland ChinaThe touch up pen is a combination of a pen and a brush. Pulling out the cover upwards is the pen, and rotating counterclockwise is the brush. Shake for 10 seconds before use, press firmly with a pen, and use by professionals.Steps for use: Please cover the intact areas of the paint surface with tape, and then apply paint !Step 1:Rotate the white cover of the touch-up pen counterclockwise and take out the brush inside. (For personal use, we do not recommend using a pen, as using a brush is easy to operate.)Step 2: Apply the color on the test paper to check the color (especially important), and continue only when the color is similar to the carStep 3:Before touching, clean the scratch area before use Scratch wax and Paint pen. Wipe the car surface with scratch wax several times (Rub hard). After shaking the stylus 10 seconds, use a brush moistened in tablet liquid or tip to brush in the faulty position.Step 4: If it is not completely covered by an operation, wait for the first coat of paint to dry, it's about 3hours, and then apply the second coat until the defect is completely covered, and wait for all the paint to dry in the defect. Finally, you can use sandpaper or cloth to polish it flat, and then wipe it clean with scratch wax . Few hours later , you can use Bright Oil （varnish）to increase bright . Use on sunny days to ensure product effectiveness.Note：Paint pen can only repair small scratches within 0.08 square meters, shallow scratches. Deep scratches cannot be repaired (the primer can already be seen), deep scratch repairs require the additional use of patching, first patching flat dents, then applying paint, and finally using varnish. Each step needs to be performed on a sunny day, each time about 4 hours apart, and then proceed to the next step after drying.