Security Hardware Cable Lock KitRetractable Cable Lock Portable Keyed Laptop Lock 3 Keys 6.2Ft for Monitors Laptops s Tablets iPadmini (Keyed Different)

Package content 1、One 6.2-foot retractable cable lock 2、One 3M anchor with high viscosity, easy to clean and no residue. 3、3 high-security independently coded keys, please keep your keys as scattered as possible to avoid losing them. 4、A waterproof storage bag is convenient to carry and store. 5、A piece of clean cotton Dimensional details Dimensional details * Steel cable maximum stretch length: 6.2 feet (1.8M). If you need longer steel cable, please contact the seller. * Steel cable diameter: 3.0MM * Anchor plate size: 40MM (1.57") * Lock body size: 24.618.5MM (0.97"0.72") Applicable keyhole size: 37MM * Weight: 135g (0.3lb) * The steel cable can bear the maximum tensile force of 1100N (240lb load) HOW TO USE The hardware with standard 37MM keyhole can be used directly without anchor plate. Hardware without standard 3*7MM keyhole needs to be used with anchor plate Wrap the wire rope around the table foot, then pass the lock head through the loop, and finally lock the lock head into the computer keyhole. Lightweight and compact, it does not take up space and is easy to carry. Breaking force of steel rope aluminum joint: 1100N Cycle breaking force of steel rope: 1122N (The outer PVC protective layer fell off during the test, and the steel core did not break) KEY CODE * 3 keys can meet daily needs, please keep the keys separately to avoid loss * The only lock code to ensure the safety of your hardware * No need to worry if the key is lost, please provide the order number and lock number to contact the seller Anchor plate * Anchor plate size: 40MM (1.57") * The industrial-grade 3M anchor plate has strong adhesion. For the first time, use a cleaning cotton to wipe the surface of the hardware, and then stick it on the surface of the hardware and press for 1 minute. After 24-48H, the anchor glue can bear a weight of more than 60lb. The longer the time, the stronger the stickiness. * When you need to remove the anchor plate, it is recommended to heat the sticker with a hair dryer, and then slowly pry it up with a hard sheet tool. There will be no residue when cleaning the sticker. If you have a better way, please share it with everyone!