Whiteboard Sticker Roll 120cm Wide | Self Adhesive Dry Erase Wall Film | 100x120cm 200x120cm | Singapore Local Seller | 1-Month Warranty

WHITEBOARD STICKER ROLL, 120 CM WIDE: turn any smooth wall, door or table into a whiteboard📋 WHAT IS IT?A thin glossy white film with glue on the back. Peel it, stick it on, and write on it with whiteboard markers. Wipe it clean and use it again and again. No drilling, no screws, no frame.✅ GREAT FOR• Kids: drawing wall, spelling and homework practice• Students: study timetable, revision notes, exam countdown• Home: family calendar, grocery list, chores chart• Office: meeting notes, sales targets, project plans, to-do lists• Shops: price board, menu, daily specials📏 PICK YOUR SIZE• 1m x 1.2m (100 cm long x 120 cm wide)• 2m x 1.2m (200 cm long x 120 cm wide)Both sizes are 120 cm wide. Measure your wall first. You can cut it smaller with scissors to fit any space.⚙️ SPECS• Surface: glossy white, dry erase• Back: self-adhesive (peel and stick)• Can be cut to size with scissors or a penknife• Use with whiteboard (dry erase) markers only✅ BEST SURFACESSmooth, clean, dry and firm: painted walls in good condition, glass, wood, metal, cabinet doors, tables.❌ NOT FORRough, sandy, dusty, damp or peeling walls, or wallpaper. On these, the film will not stick well. How well it sticks and how cleanly it comes off later depends on your wall, so we cannot promise damage-free removal.🛠️ STEP-BY-STEP INSTALLATION TUTORIAL (about 15 minutes)What you need: the whiteboard roll, scissors, a pencil, a dry cloth, and a ruler or card (to smooth). A second person helps for the 2m size.Step 1. Clean the wallWipe off dust and oil with a dry cloth. If the wall is very dirty, use a damp cloth, then let it dry completely (at least 1 hour).Step 2. Mark the positionHold the roll against the wall and lightly mark the top edge with a pencil. Use a ruler to make the line straight, so the board is not crooked.Step 3. Cut to size (if needed)Unroll on a clean floor, white side down. Measure, draw the line on the backing paper, and cut with scissors.Step 4. Peel only the top partPeel about 10 to 20 cm of backing paper from the top. Do NOT peel it all at once, or the film will stick to itself.Step 5. Stick the top edgeLine up the top edge with your pencil line and press it on, starting from the middle and moving to the sides.Step 6. Peel and smooth, little by littlePull the backing paper down slowly with one hand. With the other hand, smooth the film with a dry cloth or a card, from the middle outwards, so air can escape.Step 7. Remove air bubblesPush any small bubble to the nearest edge with the card. If a bubble will not move, prick it with a pin and press it flat.Step 8. Wait, then start writingPress firmly over the whole board, especially the edges and corners. Wait about 24 hours before writing for the best grip.✏️ HOW TO USE AND CLEAN• Write only with whiteboard (dry erase) markers.• Wipe with a dry cloth or whiteboard eraser.• Old marks: wipe with a little alcohol (e.g. hand sanitiser) on a cloth.• Wrote with a permanent marker by mistake? Write over it with a whiteboard marker, then wipe both off together.• Do not use sharp or rough cleaning pads, they scratch the surface.💡 TIPS• For a bigger board, stick two pieces side by side with the edges touching.• Corners lifting? Press them down hard for 30 seconds and avoid touching them for a day.📦 IN THE BOX1 × whiteboard sticker roll (the size you choose)Markers are not included.Not sure if your wall is suitable? Chat us a photo. We check for you.✅ Fusion Connection Singapore: local ready stock, fast delivery, 1-month warranty📷 PRODUCT PHOTOS