Auto Gate Remote Control 330mhz Smc 5326p-3 8 Dip Switch

SMC 5326 330mhz 433mhz 8 dip switch auto gate remote control

The chip should be SMC5326P-3, and frequency 330mhz or 433mhz, if your original remote is not chip SMC5326-3, please don't buy, or it will can not use, if you didn't ask us and buy the wrong products, then we will not be responsible for it.

Before you buy: 1.open the shell 2.Check the chip must be 5326, the frequency 330mhz or 433mhz How to use our remote control

A.Remote-to-remote programming:

1. Open the casing of your already-programmed remote.
2. You will see a row of small programmable numbered switches. They are in the ON or OFF position.
3. Open the casing of your new remote.
4. You will see a row of small programmable numbered switches.
5. Set them in the same way as those set in your already-programmed remote.
6. Your new remote control is programmed. B.Receiver-based programming:
7. Open the casing of your receiver. It is located next to your motor.
8. On the receiver circuit board, you will see a row of small programmable switches. They are in the ON or OFF position.
9. Open the casing of your new remote.
10. You will see a row of small programmable numbered switches.
11. Set them in the same way as those set in the receiver.
12. Your new remote control is programmed.

Include  1 x Remote Control 1 x Battery 1 x Keychain