Right Angle DC Power Extension Cable 5.5*2.5/2.1MM 4.0*1.7 3.5*1.35 Pure Copper Material Audio Video Home Appliances Accessories

Product name: right-angle elbow dc power supply male to female extension cable Special note: please ensure that the voltage output by the power supply is the voltage indicated by the device before use. say important things three times! Special note: please do not leave any comments. all messages are invalid. only grids that can be photographed are available. Dimensional description: the mold size mark of each wire is measured manually, please understand that there may be slight deviations. Plug length: the effective length of the male plug is about 10mm, the effective depth of the female socket is 9mm (the smaller port is 7mm) Wire gauge grids: 3a current, 22awg (0.3mm square) Overall length: please refer to the color classification Length single slot: cm = centimeter [unified length single slot], the color classification behind?The length is the same as the cm. Purpose of use: extension or turning of power cord Description of grids: 5525=5.52.5mm, 5521=5.52.1mm, 5030=5.03.0mm, 4817=4.81.7mm, 4017=4.01.7mm, 35135=3.51.35mm, 3011=3.01.1mm, 2507=2.50.7mm, 2006=2.00.6mm. For example: for example, the 5.52.1 male connector means that the outer diameter of the plug is 5.5mm and the inner hole is 2.1mm.For example, 5.5*2.1 female connector means that the female hole diameter is 5.5mm and the inner needle is 2.1mm.Other analogies... by the way, some people always think that a hole is a female, but the hole in the male head is actually the urethra, and the needle in the female head is actually the flower center.Please remember that whether it is dc, usb or hdmi, after plugging in, the one that includes everyone else must be female, ok! this is the same as the animal world! ! Compatibility description: (5525 male to 5521 female) this grid is compatible with 5521 and 5525. if you really don’t know whether it is 5521 or 5525, you can buy this compatible grid, but you must ensure that the current cannot be greater than 3a. this has nothing to do with the cable, mainly because the current is too large and the performance is not guaranteed.