2L Capacity Heated Magnetic Stirrer 220V EU Plug Hot Plate Stir Magnetic Mixer Precision Magnet Heating Stirrer for Laboratory

2L Capacity Heated Magnetic Stirrer 220V EU Plug Hot Plate Stir Magnetic Mixer Precision Magnet Heating Stirrer for LaboratoryModel: XLD-78-1Voltage frequency: 240V50hzSpeed range: 0-2600r/minOperating mode: temperature + speed regulationMotor Type: Brushless/Carbon BrushTable size: 120mm120mmThermal output power: 180W/250WOverheat protection: 300°CWorking capacity: 2000mlMotor power: 5WMachine size: 200146108mmPacking size: 230175*155mmN.W./G.W.: 1.45kg/1.6kgWork table material: 6061 aluminum + matte oxidation treatmentHeating temperature range: room temperature -280°CPlug: EUModel: XLD-78-1SVoltage frequency: 240V50HzSpeed range: 0-2600r/minOperating mode: temperature+speed regulationMotor type: Carbon brush motorWorkbench size: 120mm * 120mmThermal output power: 180W/250WOverheating protection: 300 ℃Working capacity: 2000mlMotor power: 5WMachine size: 200 * 146 * 108mmPackaging size: 230 * 175 * 155mmNet weight/gross weight: 1.45kg/1.6kgWorktable material: 6061 aluminum+frosted oxidation treatmentHeating temperature range: room temperature -280 ℃Plug: EUProcedure of use:1. Place the machine on a flat workbench, and insert the power cable into the power socket with the same voltage as that marked on the machine.2. Place the experimental beaker solution equipped with the ratio of the model steadily in the center coordinate position of the heating disc to confirm that it is placed smoothly and proceed to the next step.3. Turn on the power switch and the signal is on.4. Speed function: Rotate the speed control knob clockwise, and the motor will increase or reduce the speed with the change of the speed control knob.5. Heating function: Turn on the heating switch, the signal light will turn on, and the heating disk will start to heat.6. Turn off the heating switch, turn off the speed knob and turn off the power switch after the test meets the requirements.7. When the machine is idle, unplug the power cord and cut off the power supply.Please note that the package does not contain a test bottle.