JUNGLELEOPARD | Jungle Leopard Prism 4Pro ARGB 120mm 5V 3PIN ARGB 4PIN PWM Infinite Mirror Lighting Motherboard Lighting Sync Case PC CPU Fan

Welcome To The Jungle Leopard Store^ω^Happy Shopping!!!100% brand new and high product quality！✨Installation recommendationsForward is exhaust, usually installed at the top and back of the caseReverse is intake, usually installed on the side, front, and bottom of the case✨Difference:The side of Prism 4PRO is a partial infinity mirror designThe side of Prism 4MAX is a full coverage infinity mirror design✨Product Description:1. Infinite mirror light effectThe fan axis and two sides have infinity mirror lighting effects. The infinity mirror is a layered mirror that makes colors more three-dimensional and diverse. Create a deep spatial effect.2. Rich lighting effects24 lamp beads, use enough lamp beads to ensure that there is light in every corner, the light transition effect is better, and there are simple and coherent lines on the front3. Serial interfaceThe fan light interface is 5V 3PIN ARGB, and the fan interface is 4PIN PWM. Both have male and female interfaces and support series connection. Fans can be connected 1-to-1.4. ARGB light synchronizationSupports 5V 3PIN ARGB motherboard lighting synchronization, supports motherboard software for lighting control, and synchronizes ARGB of ASUS, Gigabyte, ASRock, MSI and other motherboards. (But please make sure your motherboard has a 5V3PIN interface, otherwise it cannot be controlled)5. PWM intelligent temperature controlThe fan interface is 4PIN PWM. Supports intelligent adjustment of fan speed. When the temperature is too high, the speed can be increased, and when the temperature is low, the speed can be reduced. At the same time, you can adjust the fan speed according to your needs.6. Thickened shock-absorbing padsBoth sides of the fan are equipped with thickened shock-absorbing feet, which effectively reduce noise and resonance and provide a comfortable use environment.7. Multiple models of fans are availableThe fans are divided into four models: black forward, black reverse, white forward, and white reverse. When multiple models are used in combination, it can not only meet the requirements for building air ducts in PC cases, but also display the front lighting effect inside the case to meet the lighting needs of transparent cases.✨Model: Prism 4 PROFan size: 120x120x25mmFan speed: 800-1600RPM±200Air Flow: 54.6CFM±10%Wind pressure: 1.7 mm H,O (max)LED Color: ARGBTerminal: 4PIN PWM+5V 3PIN ARGB (No Daisy chain)Voltage: 12V DCCurrent: 0.25A (max)Power: 3.0W (max)（Please refer to the speed and other parameters in this interface for reference）Note:For more inquiries about our product, you may contact us.✈️Processing Takes 1-2 Days.We will ship as soon as possible.Please leave us a positive feedback of 5 if you are satisfied with our product. customer satisfaction is our goal.Please do not give bad reviews, any problem can be solved by us.Product Details